Magnavox MWD200GA owner manual Functions, Playback

Functions

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other equipments which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.

(	⇒Page 10)	2
		1

1Press [STANDBY-ON]to turn on the DVD/CD Player.

2Press [OPEN / CLOSE A] and insert a disc with label facing up.

3Press [PLAY B] to start playback. 3

4Press [STOP C] to stop playback. 4

DVD menu

2

STANDBY-ONOPEN/CLOSE SEARCH

DISPLAY MODE

AUDIO

1 2 3

SUBTITLE

4 5 6

ANGLE

7 8 9

REPEAT CLEAR

0 +10

A-B PAUSE SKIP

SLOW

PLAY

REVFWD

STOP

	Lights up when power is on.
	OPEN/
	CLOSE PLAY	STOP
		IR
2	2 3	4	1

Hint

•When you play an MP3-format disc, details on page 10.

•A “prohibited icon” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVDs may start playback from title 2 or 3 due to specific programs.

•During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

TIP:

You can change the On-Screen language in “PLAYER MENU” setting. (Refer to page 14.)

Fast Forward / Reverse Search

Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then

Use [FWD g] or [REV h] repeatedly during playback to select the required

press [ENTER] (or [PLAY B]).

forward or reverse speed.

E 1

To continue playback, press [PLAY B].

Calling Up a Menu Screen during Playback	Hint
	• Fast forward or reverse search speed is different depending on
• Press [MENU] to call up the DVD menu.	the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and
	5(x32).
• Press [TOP MENU] to call up the title menu.

Functions

Hint

•Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details.

Resume

Press [STOP C] during playback. Resume icon

will appear at the top-left on the TV screen. R.STOP Press [PLAY B], playback will resume from

the point at which playback was stopped.

Hint

•To cancel resume, press [STOP C] one more time in the stop mode.

•The resume information will be kept even when unit is in standby mode. For MP3, playback will resume from the beginning of the track at which playback was stopped.

Paused and Step-by-Step Playback

Press [PAUSE F] during playback.

To continue playback, press [PLAY B].

PAUSE

The disc goes forward by one frame each time [PAUSE F] is pressed in the pause mode.

To continue playback, press [PLAY B].

Hint

•Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the pause mode are blurred. (Refer to pages 14-15.)

Slow Forward Search

Press [FWD g] repeatedly in the pause

mode to select the required forward speed. 1 To continue playback, press [PLAY B].

Hint

•Slow forward speed is different depending on the disc. Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2).

•Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow playback mode are blurred. (Refer to pages 14-15.)

•The reverse of slow playback is not available.

Zoom

1)Press [ZOOM] repeatedly during playback to select the required zoom factor: x2, x3, x4, x1/2 or OFF.

x2 x3 x4 x1/2

2)Use [K / L / s / B] to slide the zoomed picture across the screen.

3)To exit zoom function, press [ZOOM] repeatedly to select OFF.

Hint

•Zooming function does not work while the disc menu is displayed.

•Some part of the picture may not be zoomed depending on the disc or playback status.

– 9 – EN

E6C0SUD.indd 9 2006/07/06 12:05:40