Magnavox 15MF200V/37 owner manual Antenna Connection, Basic Cable TV Connection

ANTENNA CONNECTION

Acombination antenna receives normal broadcast channels (VHF 2–13 and

UHF 14–69). Your connection is easy because there is only one 75Ω (ohm) antenna jack on the back of your TV, and that’s where the antenna goes.

1 If your antenna has a round cable

(75 ohm) on the end, then you're ready to connect it to the LCD TV Monitor.

		TV
Outdoor or Indoor Antenna		VIDEO
		S-VIDEO
(Combination VHF/UHF)
DC IN ANALOG	1 2 AUDIO OUT
	AUDIO

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.

2 Connect the antenna (or adapter) to the TV jack on the rear of the LCD TV Monitor. If the end of the antenna wire is threaded, screw it down finger tight.

1 2

Twin-lead

wire to

300-75Ω

adapter

OR

Antenna with 75Ω cable

Rear Jack panel of

Television

TV

BASIC CABLE TV CONNECTION

Your Cable TV signal into your home may be a single, 75Ω (ohm) cable. If so, this

connection is very simple. Follow the step below to connect your Cable TV signal to your new LCD TV Monitor.

1 Connect the Cable TV signal to the TV jack on the LCD TV Monitor. Screw it down finger tight.

TV

S-VIDEO

VIDEO

DC IN ANALOG 1 2 AUDIO OUT

AUDIO

Rear Jack panel of

Television

Cable TV signal from	1
Cable Company
(75Ω coaxial cable)

TV

7