Magnavox 15MF200V/37 owner manual Cable BOX Connections, Cable Box with RF In/Out Jacks

Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the

Cable Box.

Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box.

Connect the other end of the coaxial cable to the LCD TV Monitor’s TV jack. Screw it down finger tight.

CABLE BOX CONNECTIONS

If you have a Cable Box, follow either set of

these steps to complete your connections.

Cable TV signal from the Cable Company

Cable Box with RF In/Out Jacks

This connection will not supply Stereo sound to the LCD TV Monitor. The sound from the Cable Box will be monaural (single-channel, not left and right).

1

2

3

4 Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to the same channel. When watching TV programming, change channels at the Cable Box, not the LCD TV Monitor.

	1 2
	OUTPUT
		CH
CABLE	3	4
	TO TV
IN

3	75Ω
	Coaxial
TV	Cable

TV

S-VIDEO

VIDEO

DC IN ANALOG1 2

Rear jack panel of

Television

Cable Box with Audio/Video Out Jacks

This connection will supply Stereo sound to the

LCD TV Monitor.

Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the
1 Cable Box.
Using an RCA-type video cable, connect							TV
					TV		S - VIDEO
one end of the video cable to the					S-VIDEO		VIDEO
2 Video Out jack of the Cable Box.
					VIDEO
Connect the other end of the cable to
the yellow VIDEO jack on the rear of			DC IN ANALOG	AUDIO	AUDIO OUT
				1 2
the TV.							Rear Jack Panel
Video cables are usually marked with yel-
							of Television
low and are available from Magnavox or
							2
electronics retailers. Video jacks on most
equipment are yellow.
Using RCA-type, stereo audio cables, con-
nect one end of the cables to the left		DC IN	ANALOG				AUDIO OUT
3 and right Audio Out jacks of the	4				1	2	Video Cable
			3		AUDIO
Cable Box.
Connect the other end of the cables
to the red and white AUDIO ends of
the audio cable supplied. Connect		DC Adapter
the other end of that cable to the			Audio Cable
Audio 2 jack on the rear of the LCD
TV Monitor.
Audio cables are usually marked with red		Power
and white and are available from Magnavox		Cable
or electronics retailers.			Cable
The right audio jack is red and the left			TV signal
audio jack is white. Match the cable colors
to the jack colors.

Plug the DC adapter into the DC IN
jack on the LCD TV Monitor. Plug
4 the power cable into an outlet. Press	1
the Video Source button for the

source you are using.

OUTPUT

CH

	3	4
CABLE	TO	L	AUDIO	R	VIDEO
IN	TV		OUT		OUT

Cable Box

8