HOW TO USE THE TUNER MODE CONTROL
The TUNER MODE control lets you change the TV input signal to ANTENNA or CABLE mode. It is important hat you know which type of signal to look for (Cable or Antenna).
Follow these steps for Digital Mode and Analog Mode
1 | Press MENU button on the remote control to |
display the onscreen menu. | |
2 | Press CURSOR < or > to scroll through |
the onscreen menu until you see Install | |
highlighted. | |
3 | Press CURSOR > to display the Install menu |
features. | |
4 | Press CURSOR < or > to scroll through the |
Install features until you see Tuner Mode | |
highlighted. |
5Press CURSOR > to select Antenna or Cable.
6When finished, press MENU button on the remote control twice to exit the menu from
the TV screen.
Digital Mode | Analog Mode |
Language | Language |
Tuner Mode | Tuner Mode |
Auto Install | Auto Install |
| Channel Edit |
DTV Setup |
|
Install | Install | |
Language | Language | |
Tuner Mode | Tuner Mode | |
Auto Install | Auto Install | |
Channel Edit | ||
|
MENU
>
HELPFUL HINTS
When CABLE is selected, channels
When ANTENNA is selected, channels
>
< >
When you install in either Digital or Analog mode, both Digital and Analog channels will be installed.
11