SOUND MENU CONTROLS
o adjust your TV sound, use the Sound Menu Controls listed below. Your selection is stored as Personal | ||
T | Digital Mode | Analog Mode |
1 | Press MENU button on the remote control |
|
to display the onscreen menu. |
| |
2 | Press CURSOR > to until the Sound menu |
|
feature is highlighted. |
| |
3 | Press CURSOR > or < to adjust |
|
Treble: Enhance the high frequency sounds. |
| |
Bass: Enhance the low frequency sounds.
Balance: Level of sound coming from the left and right speakers.
AVL: (Auto Volume Leveler) When turned On AVL will level out the sound being heard when sudden change in volume occurs during commercial breaks or channel changes.
Incr. Surround: Select Incr. Surround or Stereo settings if you're in Stereo mode Select Mono or Spatial if you're in Mono mode.
SAP: Secondary Audio Programming is sent as a third audio channel, a SAP signal can be heard apart from the current TV program sound.
Note: If SAP is not present on a selected show, No SAP will be displayed on the TV screen.
Sound: toggles between Stereo or Mono
settings.
R 
Incr. Surround | Incr. Surround |
| or Stereo |
or
Spatial or Mono
Note: If Stereo is not present on a selected show and the TV is in Stereo mode, the sound coming from the TV will remain in the Mono mode.
MENU
>
> < >
AUTO SOUND
Te Auto Sound feature allows the listener to select between four different
1 Press AUTO SOUND button on the remote
control. The current Auto Sound setting will
be displayed in the middle of the TV screen.
2Press AUTO SOUND repeatedly to toggle between the four settings. (Personal, Theatre, Music, or Voice).
NOTE: The way you choose to set the Sound Menu
Controls will become your Personal setting.
AUTO
SOUND
19