BASIC OPERATION
DESCRIPTION OF OPERATION
You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset, system and audio (68cm only) according to the menu shown on the screen.
PICTURE |
|
bright | 45 |
contrast | 63 |
colour | 63 |
sharp | 63 |
tint | 63 |
AUDIO
volume 32
balance 00
SYSTEM
coring on
PRESET
pos. 0
rem. on
band
CLOCK |
|
time | 16:00 |
prompt | |
16:25 | |
pos. | 10 |
|
|
AUTO-SEARCH OPERATION
This function will automatically set the channels on 1,2,3,4 . If you wish to set the correct stations on the corresponding channels see ‘Channel Position.’
1.Press ‘PRE’ button on the remote control to display the preset menu.
2.Press ‘P
/P
’ channel button to select
3.Press ‘VOL
/VOL
’ volume button to start
PRESET
pos. 0
rem. on
band
NOTE: You can store the TV channels from ‘0’ position in numeral sequence. The channel position will be ‘0’ again when search is finished. The colour of ‘0’ turns green when the program has been searched. Otherwise, it turns red.
8