Channel position, Auto-Search | Magnavox MTV-34, MTV-51, MTV-68

Preset menu operation

channel position

1.Press the ‘PRE’ button on the remote control to select the ‘PRESET’ page. Every 10 seconds the present menu will flick off the screen. Continue to press the ‘pre’ button to re-instate the menu.

2.When in the ‘PRESET’ mode, use the remote control ‘VOL/VOL’ buttons to select the number for the station you want to use on the remote control (eg.: on the first line marked ‘pos’, select the channel you wish to set up. Press the channel number on the remote control till the channel number is displayed in the ‘pos’ position. If you want to select Channel 9 the number ‘9’ button is pressed. To select a two digit number, the _ _ button on the remote control must be pressed first.

3.Press the ‘PRE’ button again to select the REM line. Use the ‘VOL/VOL’ buttons to toggle the REM On or Off and select OFF.

4.Next press the ‘PRE’ button again to select the ‘BAND’ line and select either VL, VH or UHF depending on the television station required.

Channel 2 = VL Channel 7, 9 & 10 = VH Channel SBS & 31 = UHF

*Note some areas have all channels on the UHF band.

5.Press the ‘PRE’ button to select the SEMI-SEARCH line and then press the ‘VOL’ or ‘VOL’ button until the desired television station reception

is found. If a station is found that is not the desired station press the ‘VOL’ or ‘VOL’ button again until the desired station is found.

6.When all stations are programmed, either wait for the menu to turn off automatically or keep pressing the ‘PRE’ button until the menu turns off.

NOTE: When REM. item is set to ‘OFF’ this position will be skipped while you use ‘P/P’ buttons to scan the stored channels.

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search --+------------

Basic Operation

FINE		SEMI-SEARCH
1.	Press PRE button to display the presetting menu.	1.	Press PRE button to display the presetting menu.
2.	Press ‘P /P ’ button to select FINE item.	2.	Press ‘P /P ’ button to select SEMI-SEARCH item.
3.	Press ‘VOL /VOL ’ button up or down to adjust the	3.	Press ‘VOL /VOL ’ button to search the TV
	picture and the sound.		program you want.

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search --+------------

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search --+------------

AUTO-SEARCH

1.Press PRE button to display the presetting menu.

2.Press ‘P/P’ button to select AUTO-SEARCH item.

3.Press ‘VOL/VOL’ button to start auto-search. All the TV programs received will be stored automatically.

PRESET

pos. 0

rem. on

band v-l fine semi-search auto-search --+------------

Preset menu operation