Magnavox 27MS343S owner manual Remote Control

	Remote Control
STANDBY y Button
Press to turn the TV on or off (standby).
You also can turn on the TV by pressing
the CH (annel) 8/9 buttons on the
front of the TV.	STANDBY MUTE

SLEEP Button
Press to select a time period (10 min-
utes to 120 minutes in 10-minute incre-	SLEEP	CALL	BOOKMARK
ments) after which the TV will turn itself
off. Details are on page 21.	SMART	MTS	TV/AV
	PICTURE
SMART PICTURE Button	SMART		EXIT
Press to select one of the four picture
	SOUND		MENU
settings (MOVIES, SPORTS, WEAK
SIGNAL, or PERSONAL).
Details are on page 16.		CH
SMART SOUND Button	VOL		VOL
Press to select one of the four sound
effect settings: THEATRE, PERSONAL,		CH
VOICE, or MUSIC.
Details are on page 28.
MENU Button	1	2	3
Press to see the TV’s on-screen menu.
	4		6
Press to go to the previous menu or to		5
remove a menu from the screen.
VOL (volume) +/- Buttons	7	8	9
	DISPLAY
Press to adjust the TV sound level.			100
DISPLAY Button		0

Press to see the current channel number on the TV screen. Press to remove a menu from the screen.

9

MUTE Button

Press to cancel or restore the TV sound. Pressing the volume buttons (VOL 8/9 or VOL +/-) also will cancel mute and restore the sound.

CALL Button

Press to switch between the two channels you bookmarked.

BOOKMARK Button

Press to mark two channels that you can recall with the CALL button.You cannot bookmark the Audio/Video In channels (VIDEO 1 and VIDEO 2).

TV/AV/EXIT Button

Press to select TV channels or the Audio/Video In channels (VIDEO 1 or VIDEO 2). Press to remove a TV menu.

MTS Button

Press to select a sound mode if available with the TV programming: MONO, STEREO, SAP, or MONO+SAP.

Details are on page 30.

CH (channel) +/– Buttons

Press to select memorized TV channels.

Number Buttons

Press to select TV channels directly. For single-digit channels, press “0” first, then the number of the channel.

For channels 100 and above, press the 100 button first, then the next two numbers of the channel. For example, to choose chan- nel 115, press the 100 button, then Number 1, then Number 5.

(You can select channels above 69 only if you have Cable TV. Make sure TV/CABLE is set to CABLE. Details are on page 11.)