Extron electronic DSC HD-3G A, DSC 3G-HD A manual Locking the Front Panel Executive Mode, Resetting

Page 46

Locking the Front Panel (Executive Mode)

To prevent access by unauthorized users or accidental changes to the DSC settings, you can lock the front panel controls by placing the DSC in executive mode. In this mode, all front panel buttons are disabled and control is available only by SIS commands.

To lock the front panel, do either of the following:

Press and hold the front panel Menu and buttons until the OSD displays the message Executive Mode Enabled (approximately 5 seconds). The message remains on the OSD approximately 2 seconds.

Enter the Enable SIS command (see the Front Panel Lock (Executive Mode) commands on page 59).

To unlock the front panel, do either of the following:

Press and hold the front panel Menu and buttons again until the OSD displays the message Executive Mode Disabled (approximately 5 seconds). The message remains on the OSD approximately 2 seconds.

Enter the Disable SIS command (see the Front Panel Lock (Executive Mode) commands).

Resetting

Resetting the unit causes various settings to revert to the defaults that were set at the factory. Resets can be performed from the front panel buttons, the OSD, or SIS commands. The following resets are available:

Factory defaults: This reset clears all user-specified settings but retains the latest firmware version. You can perform this reset by:

Selecting Factory Reset from the Advanced submenu of the OSD (see the Factory Reset option of the Advanced submenu on page 33)

Entering the Reset all device settings to factory default SIS command (see the Reset command on page 60)

When the reset is complete, the message Factory Reset is displayed on the OSD.

Factory Firmware: This reset returns the unit to its factory default settings, including the original firmware with which it was shipped. All user settings are cleared.

To perform this reset, press and hold the Enter button for 20 seconds while applying power to the unit. When the reset is completed, the message Firmware Reset appears on the OSD.

NOTE: The Firmware Reset and Factory Reset messages are displayed for 1 minute after the reset to allow time for the display device to sync with the DSC output.

DSC 3G-HD A and DSC HD-3G A • Operation

40

Image 46
Contents DSC HD-3G a Safety Instructions FCC Class a Notice Software Commands NotificationsContents DSC 3G-HD a and DSC HD-3G a Contents About this Guide About the DSC 3G-HD a and DSC HD-3G aFeatures DSC 3G-HD aBoth Models LockIt Hdmi cable lacing bracket providedApplication Diagrams DSC 3G-HD a Application ExampleRear Panel Connections DSC 3G-HD a Rear PanelInput connector Audio input connectorConnecting to the RS-232 Port Securing the Hdmi Connector Using the LockIt BracketConnecting for Remote Control Output connectorsConnecting to the USB Config Port Connecting to the RS-232 PortFound New Hardware Wizard Opening Screen Driver Software Installation Window for USB Software Front Panel Features DSC 3G-HD a Front PanelOutput signal information LEDs Input signal information LEDsGbps Smpte 424M Gbps Smpte 292M Mbps Smpte 259M Menu Overview On-screen DisplayCompany name and product name are in the upper-left corner OSD Menus DSC 3G-HD a Submenu Submenu ItemOSD Menu DSC HD-3G a Using the Front Panel Buttons with the OSD Menus Using the OSD Menus OSD Main Menu, Initial ViewQuick Setup submenu Quick Setup Submenu DSC HD-3G aUser Presets submenu User Presets Submenu User Presets Input PresetsSaving a user preset Picture Controls submenu Picture Controls SubmenuInput submenu Example of a Selected Picture Control FieldSelecting an input Edid Output Submenu DSC 3G-HD a Output Submenu DSC 3G-HD aResolutions and Refresh Rates for the DSC 3G-HD a Output Submenu DSC HD-3G a Output Submenu DSC HD-3G a480i 576i 720p 1080i 1080p Audio Submenu Audio Submenu DSC 3G-HD aAudio Format Details Model GroupSDI Embedded Audio Hdmi Audio Signal DSC HD-3G a Audio EmbeddingAdvanced submenu Advanced SubmenuDSC 3G-HD a and DSC HD-3G a Operation Communication Screen Device Info ScreenAuto-Image Device Info Screen DSC 3G-HD aCustom Rates DSC 3G-HD a Only Changing the Output Resolution and Refresh RateImporting an Hdmi Edid DSC 3G-HD a Only SDI Signal Type Resolutions Resetting the Output RateFront Panel Button Function Presets Power Save ModeAuto Memories Input Presets User PresetsSaving a preset when using a matrix switcher Locking the Front Panel Executive Mode ResettingSIS Commands Copyright InformationUsing the Command and Response Table Error ResponsesDSC-initiated Messages X1# Symbol DefinitionsX1$ DSC HD-3G a -1080through +1080 DSC HD-3G a X3@ X2@X2% X3#X4$ X4#X5$ X6# X6$X2! = X4@ Input Configuration Total Lines32, 22, and 241 Film Mode Detection Total PixelsX1% Hdet X1%X1% Brit X1 HctrX1& Vsiz X1 VctrX1& Hsiz X1 * X1 * X1& * X1& Ximg Ximg X1 * X1 * X1X2% , X1$ Pnam X1$ =X2 , X1$ Pnam X2 RateX4 Ssav X4* VtpoX6@ X4 =X6$ = X6%X6% = Audio Gain and Attenuation AmtX5$ G Aud X5$ Audio Input FormatX5@ X5! AescX5@ Aesg X2@ TestX3& = # = X1 = X1# = X3 = X4@ = Information Requests General InformationVrb X1@X3! CV X3@ CN Ipn X3@Installing the Software from the Disk Windows-based Control ProgramDownloading the PCS Control Software from the Web File Download windowSoftware Links on the Download Page of the Extron Website PCS Link on the PCS Web Starting the Control Program New PCS Software WindowReference Information Mounting OptionsExtron Warranty
Related manuals
Manual 4 pages 2.66 Kb Manual 4 pages 62.37 Kb

DSC 3G-HD A, DSC HD-3G A specifications

Extron Electronics has long been a leader in the field of audiovisual solutions, and the DSC HD-3G A is a testament to the company’s commitment to high-quality video distribution and signal processing. This versatile device is designed specifically for applications that require the handling of high definition video signals, with support for 3G-SDI and HD-SDI formats.

One of the standout features of the DSC HD-3G A is its ability to automatically detect incoming signal formats. This feature simplifies setup and ensures compatibility with various video sources. The DSC HD-3G A supports resolutions up to 1080p, providing users with exceptional image quality and clarity crucial for events, presentations, and broadcasts.

A defining characteristic of the DSC HD-3G A is its robust signal processing capabilities. This includes not just straight signal pass-through but also the ability to handle time-base correction, ensuring a stable output regardless of the input signal's quality. The device employs advanced equalization technologies, which allow for long cable runs without signal degradation, a vital capability in professional environments such as studios and live event venues.

In terms of connectivity, the DSC HD-3G A boasts multiple 3G-SDI input and output connections, offering flexibility in routing signals to various displays or recording devices. The unit is designed with a compact form factor, making it easy to integrate into existing systems without taking up excessive space.

Reliability is another core characteristic of Extron products, and the DSC HD-3G A is no exception. Built with high-quality components and rigorous testing standards, this device ensures consistent performance even in demanding scenarios. Furthermore, users can take advantage of remote monitoring and control capabilities that facilitate easier management of the equipment from any location.

In summary, the Extron DSC HD-3G A offers an array of cutting-edge features that cater to the needs of professionals in the audiovisual sector. Its automatic signal detection, superior signal processing, extensive connectivity options, and reliability make it an invaluable tool for anyone seeking to distribute high-definition video signals with confidence and precision. Overall, this device exemplifies Extron's dedication to advancing audiovisual technology and meeting the ever-evolving demands of its users.