Extron electronic DSC HD-3G A, DSC 3G-HD A X4@, Input Configuration Total Lines, Total Pixels

Command	ASCII Command	Response	Additional Description
	(Host to Scaler)	(Scaler to Host)
Input Configuration (continued)
Total Lines
View total lines	E TLIN }	X^ ]	Show total number of lines for
		In verbose modes 2 and 3:	the input.
		Tlin 1 * X^ ]
Total Pixels
View total pixels	E TPIX }	X& ]	Show the total number of pixels
		In verbose modes 2 and 3:	(X&) for the input.

Tpix 1 * X& ]

Horizontal or Vertical Start

View horizontal start E HSRT } X$ ]

In verbose modes 2 and 3:

Hsrt 1 * X$ ]

View vertical start E VSRT } X$ ]

In verbose modes 2 and 3:

Vsrt 1 * X$ ]

Show the horizontal location of the first active pixel (X$) of the input.

Show the vertical (line) location of the first active pixel (X$) of the input.

3:2, 2:2, and 24:1 Film Mode Detection

Enable auto detection	E 1 FILM }	Film 1 * X1) ]	Enable automatic detection of
			film mode (3:2, 2:2, and 24:1
			pull-down) (default).
Disable auto detection	E 0 FILM }	Film 1 * X1) ]	Disable automatic film	mode
			detection.
View setting	E FILM }	X1) ]	View the current film	mode
		In verbose modes 2 and 3:	setting.
		Film 1 * X1) ]
Picture Adjustments
Video Mute (Defaults to unmuted after a power cycle.)
Mute video to black	1 * 1B	Vmt 1 * 1 ]	Mute video, displaying black
			video on output.
Mute all sync and video	1 * 2B	Vmt 1 * 2 ]	Mute all of the signal on the
			SDI output or all TMDS on the

HDMI video output.

Unmute video and	1 * 0B	Vmt 1	* 0 ]
output sync
View	1B	X4@ ]
		In verbose modes 2 and 3:
		Vmt 1	* X4@ ]

DSC 3G-HD A: Display the selected input on the HDMI output.

DSC HD-3G A: Display the select input.

DSC 3G-HD A: View the mute status on the HDMI output.

DSC HD-3G A: View output mute status X4@.

NOTE: X$	= Horizontal or vertical start: 0 to 255 (default midpoint = 128)
X^	= Total lines: ±512 of the default value
X&	= Total pixels: ±512 of the default value
X1)	= Film mode automatic detection status: 0 = disabled, 1 = enabled
X4@	= Video mute status: 0 = unmuted (default), 1 = muted, 2 = all output sync and video muted

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 50