Dynex DX-L40-10A manual Connecting a component video device, Connecting an S-video device

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 11 Tuesday, July 28, 2009 10:07 AM

Making connections DX-L40-10A 11

Connecting a component video device

A component (Y, Pb, Pr) picture can be displayed only when a 480i, 480P, 720P, or 1080i signal is received.

To connect a component video device:

1Make sure that your TV’s power cord is unplugged and the component video device is turned off.

2Connect a component video cable to the COMPONENT OUT jacks on the component video device.

Connecting an S-video device

To connect an S-video device:

1Make sure that your TV’s power cord is unplugged and the S-Video device is turned off.

2Connect an S-Video cable to the S-VIDEO OUT jacks on the S-Video device.

	Side of TV
-VIDEO	S-video cable
S
R

HDMI3 HDMI2

AUDIO OUT

L R

L

R

COMP1

	VGA		VGA
	AUDIO IN
	AV2
VIDEO	L	R
Y	PB	PR L L		RR
		COMP2

Back of TV

Note: Cables are often color-coded to connectors. Y = Green cable

Pb = Blue cable Pr = Red cable

VIDEO	L	Audio cable
HDMI1
	ICE	VIDEO
	RV	L	R	S-VIDEO
	SE

Component video devices S-video device

Component video cable

3Connect the other end of the component video cable to the COMP1 or COMP2 jacks on the back of your TV.

4Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device.

5Connect the other end of the audio cable to the COMP1 or COMP2 audio jacks on the back of your TV.

To play from a component device:

1Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.

2Press or to select COMP1 or COMP2, then press ENTER.

3Turn on the component video device and set it to the correct output mode. See the component video device’s user guide for more information.

3Connect the other end of the S-video cable to the S-VIDEOjack on the side of your TV.

4Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device.

5Connect the other end of the audio cable to the AV1 audio jacks on the back of your TV.

To play from a component device:

1Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.

2Press or to select S-VIDEO, then press

ENTER.

3Turn on the S-video device and set it to the correct output mode. See the S-video device’s user guide for more information.