|
|
|
|
|
|
|
|
| Turning on your TV for the first time |
|
|
| |
|
|
|
|
|
|
|
To play audio from a digital sound system:
1Turn on your TV.
2Turn on the external audio device and set it to the correct output mode. See the audio device’s user guide for more information.
Turning on your TV for the first time
To configure your TV:
1Make sure that you have inserted the batteries in the remote control, connected the antenna, cable, or cable box to the TV, and connected the AC power.
2Press POWER, then wait several seconds. The initial setup screen opens (only the first time you turn on your TV) and guides you through setting up your TV’s operational settings.
5Press 
or 
to select Antenna or Cable, then press ENTER. The Channel Scan screen opens.
6Press 
or 
to select Scan, then press ENTER. The channel scan begins.
Note: Channel scan is not necessary if you are using a satellite or cable box.
3Press ENTER. The setup wizard starts with the Language screen.
4Press 
or 
to select the language you want, then press ENTER. The Tuner screen opens.
Understanding the basics
Turning your TV on or off
To turn your TV on or off (standby mode):
1Plug the power cord into an AC power outlet.
2 Press POWER. Your TV turns on.
3Press POWER again to turn off your TV. When you turn off your TV, it goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Selecting the video input source
The first time you turn on your TV, you must select the TV signal source. Your TV stores this information, so you do not need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV.
To select the video input source:
1Turn on your TV, then press INPUT on the remote or on the TV. The INPUT SOURCE menu opens.
2Press 
or 
to highlight the video source, then press ENTER.