Timer-recording radio programs
To
7 | TIMER | 6 |
SELECT |
23,4,5
1Tune in the preset radio station (see “Listening to the radio”).
2Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
3Turn jog dial to select REC, then press ENTER/NEXT.
“ON” appears and the hour digits flash in the display.
1 2 REC SLEEP
VOLUME
ALL DISCS
§
4 Set the time to start recording.
Turn the jog dial to set the hour, then press ENTER/NEXT.
The minute indication starts flashing.
1 2 REC SLEEP
VOLUME
ALL DISCS
§
Turn the jog dial to set the minute, then press ENTER/NEXT.
The hour indication flashes again.
5 Set the time to stop recording following the above procedure.
The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears.
6 Insert a recordable tape.
7 Turn off the power.
When the recording starts, the volume level is set to the minimum.
To check the setting
Press TIMER SELECT and turn the jog dial to select “REC”, then press ENTER/NEXT.
To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to select “TIMER OFF”, then press ENTER/ NEXT.
Note
If the power is on at the preset time, the recording will not be made.
44