3 Press ENTER/NEXT.
The minute indication flashes.
Step 3: Presetting radio stations
4 Turn the jog dial to set the minute.
5 Press ENTER/NEXT.
The clock starts working.
Tips
•If you’ve made a mistake, start over from step 1.
•Setting the time deactivates the demo mode. If you want to display the demo mode, press DEMO when the power is off.
Note
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
You can preset the following number of stations:
–2 band model: 20 for FM, 10 for AM.
–3 band model: 20 for FM, 10 for MW, and 10 for SW (or LW, depending on the model you purchased).
–4 band model: 20 for FM, 10 for MW, 10 for LW, and 5 for UKV.
|
| (Power) | 4 5 1 3 |
|
2
continued
7