Epson DLR3-08N/410CDV Connections on the rear, Designation Functions/connections Example devices

Connections on the rear

Note: Connections optionally for NTSC or PAL operation.

1 2

VIDEO IN 1

LOOP1

VIDEO IN 2	VIDEO IN 3	VIDEO IN 4	VIDEO IN 5	VIDEO IN 6	VIDEO IN 7	VIDEO IN 8
LOOP2	LOOP3	LOOP4	LOOP5	LOOP6	LOOP7	LOOP8
AI1 AI2 AI3	AI4 GND AI5 AI6	AI7 AI8 GND	AI9	AI10 AI11 AI12 GND AI13 AI14 AI15		AI16 GND

VIDEO IN 9	VIDEO IN 10	VIDEO IN 11	VIDEO IN 12	VIDEO IN 13	VIDEO IN 14	VIDEO IN 15	VIDEO IN 16
LOOP9	LOOP10	LOOP11	LOOP12	LOOP13	LOOP14	LOOP15	LOOP16
		CAUTION		CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
				NO USER-SERVICEABLE PARTS INSIDE.
				DO NOT REMOVE COVER (OR BACK).
		RISK OF ELECTRIC SHOCK		REFER SERVICING TO QUALIFIED
		DO NOT OPEN		SERVICE PERSONNEL.

NO C NO NC C NO ARI GND /RX+ /RX- TX+ TX-

NETWORK RS-232C VGA VIDEO OUT SPOT

1 12 11

10 9 8 7 6

5 4 

No.	Designation	Functions/connections	Example devices
1	VIDEO IN 1-16	Max. 16 video channels	Cameras
2	LOOP 1-16	Max. 16 loop-through video channels	Cameras
3	SPOT	Video output	Spot Monitor
4	VIDEO OUT	Video output	Monitor
5	VGA	PC monitor	PC monitor
6	RS-232C	External interface	Modem
7	NETWORK	Network	Network cable
8	AI1 - AI16	Alarm inputs for external devices	Sensors
9	/RX+, /RX-,	External interface (RS-485)	Keyboard, PTZ camera
	TX+, TX-
10	ARI/GND	Reset alarm with external signal	Switch
11	NO, C, NC	Alarm outputs for external devices	Siren, flashing light
12	Reset switch	Reset to factory defaults	-
13	Power supply	Mains power connection	-

DLR3-XXN/XX