Chauvet TFX-UVLED user manual Operating Instructions, Standalone Mode, Setup

Page 10

4. Operating Instructions

The TFX-UVLED is a DMX-512 controllable, flash UV LED panel made up of highly efficient and super bright UV LEDs. The TFX-UVLED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 3 channels.

Standalone Mode

The TFX-UVLED can be operated without a DMX controller in a standalone mode. It can be operated as a single fixture or together with several other TFX-UVLED fixtures in what is called a “Master/Slave” configuration.

Sound

Auto

ON 1 2 3 4 5 6 7 8 9 10

1

2

4

8

16

32

64

128

256

Option

Single-Fixture Mode

The TFX-UVLED can be set to operate independently of other fixtures or a DMX controller in either a sound-active or automatic mode. A serial data-link is not necessary for this mode of operation and it is recommended that no connection to other fixtures be made at all.

1. Simply choose from any one of 10 built-in “DIP-switch Options” from the table below.

Master-Slave Mode

A master-slave mode setup consists of more than one fixture connected in a serial data link without the use of a controller. In a master-slave operation the slave fixtures will synchronize and will behave either identically or in a planned chase pattern to the master unit which must be the first in the serial daisy chain. A Master-Slave TFX-UVLED system can consist of an unlimited range of fixtures or at least the number stated to conform to EIA-485 standards.

Setup

1.The TFX-UVLED sets up automatically for Master-Slave, no DIP-switch settings are required other than for selecting DIP-switch Options.

2.Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the DMX IN input connector of the Slave fixture consisting of a (male) 3 pin connector. Continue the loop from DMX OUT to DMX IN.

Dipswitch Options

Functions

Dipswitches ( ON )

Notes & Description

 

 

 

Sound Active

None

Music: Sound Activated, Rotary knob sets sound sensitivity

 

1

Flash Speed 1

 

2

Flash Speed 2

 

3

Flash Speed 3

Flash

4

Flash Speed 4

5

Flash Speed 5

 

 

6

Flash Speed 6

 

7

Flash Speed 7

 

8

Flash Speed 8

Full On

9

All LEDs full on

Preset Program

10

Preset Programs run in Automatic speed

TFX-UVLED User Manual

10

2006-10-11/12:19

Image 10
Contents LED Shadow Table of Contents Contact Us Before You BeginUnpacking Instructions Your shipment includes the followingProtection against Fire & Burns Important Safety InformationProtection against Electric Shock Protection against exposure to UV Ultraviolet RadiationIntroduction FeaturesDMX Channel Summary Product Overview AC Power SetupMounting Fixture Linking Cable ConnectorsDMX Data Cable Pin to 5-Pin Conversion Chart Setting up a DMX Serial Data LinkStandalone/Master-Slave Fixture Linking Setup Standalone ModeOperating Instructions DMX Control Mode Daisy Chain Serial Data LinkAppendix Returns ProcedureMaintenance DMX PrimerBinary & DMX DIP-switch Addressing Binary Addressing Quick Reference Chart DMX & Binary Address Quick Reference ChartDMX Channel Values Technical Specifications Technical Support