Installation Instructions
Assembly
1.Insert both Elbow Joints (J) into each Horizontal Curved Frame (N) and join all four frame parts together as shown below.
2.After making sure that all four corners join at right angles to form a perfect rectangle and fasten together with the M5 screws (E).
Minimal gap is normal here
3.Lay out the Screen Material (O) and Tension Rods (L) on a clean and dry surface and gently roll out the screen material on the back of the frame.
Vertical Upright Frame
Horizontal Curved Frame
Black Backing of the screen material
4
Rev.052611‐AS |
|
www.elitescreens.com | info@elitescreens.com |