Elite Screens 052611AS manual Black Backing for AcousticPro1080 Models

Page 6

Black Backing for AcousticPro1080 Models

This procedure only applies to AcousticPro 1080 models, disregard if your curved frame us now an AcousticPro 1080 variant. The black backing counters the effects of light penetration that would otherwise light up all items behind the screen and spoil the picture.

The black backing goes behind the projection surface and is held into position by Velcro‐faced fix plates.

Black backing

Fix plate secures AcousticPro1080 and the backing.

AcousticPro1080 Screen Material Cover by Black backing.

Fix Plate

Black backing

Tension Rod

(Stretches the AcousticPro1080 material)

After the material has been installed, the backing will lie over the back of the white (AcousticPro1080) material and then be held into place by the fix plates as they’re added (Fig.1‐3). Interval markings reveal the suggested points of attachment (Fig.1). The prongs on the fix plates (Fig.2) straddle a lip on the back of the frame creating friction to hold the material in place (Fig.3‐4).

Fig.1

Fig.2

*An alternate way to attach the black backing to the back of the AcousticPro1080 material is to utilize the Velcro tabs located on the outer surface of the fix plates (Fig. 3‐4).

Fig.3

Fig.4

Rev.052611‐AS

6

 

www.elitescreens.com

info@elitescreens.com

Image 6
Contents Lunette Series Important Safety & Warning Precautions Parts List for the Lunette Series Installation Instructions AssemblyViewing Surface Black Backing for AcousticPro1080 Models Attach the FIX Plates Center Support BAR Installation Rev.052611‐AS Model Numbers Parts List Curve235 Dimensions of Diagram onLunette Series Dimension Model Size/Aspect Width Height RatioWarranty Policy North America only U.S. and CanadaContact Info America Europe Elite Screens Inc Elite Screens Europe