Fujitsu P42-2, P42-1A, P50-2 manual Picture menu picture settings

MYRICA P42-1A / P42-2 / P50-2

PICTURE menu - picture settings

►Press the MENU button to open the OSD menu.

►Mark the PICTURE menu item with the / buttons.

►Press the MENU button to activate the menu item.

The buttons available to you for setting the options are shown in the menu footer.

Mode	With this function you set the picture mode.
	The contrast, brightness, colour and focus of the picture are set to optimum
	values depending on the picture mode.
	Possible values: Standard, Vivid, Mild, User.
Temperature	With this button you set the colour temperature.
	Possible values: Cool2, Cool1, Normal, Warm1, Warm2.
Video NR	With this function you switch the picture correction (Noise Reduction) on or
	off.
	Possible values: On, Off
Screen form	With this function you set the picture format.
	Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3.
Geometry	With these functions you set the position and the synchronisation of the
(in PC mode only)	picture display.
	To set the picture display, first use the Auto function and correct the picture
	display and, if necessary, then with the other functions.
	These functions are only available when PC is selected as the signal
	source.
	H Position	With this function you set the horizontal picture
		position.
	V Position	With this function you set the vertical picture position.
	Phase	With this function you fine-tune your display to
		eliminate picture interference.
	Auto	With this function you optimally set the picture display
		automatically.

	A26361-K1040-Z120-1-M119, edition 3	English - 25
Downloaded From TV-Manual.com Manuals