MYRICA P42-1A / P42-2 / P50-2
Cleaning
●Remove the power plug before cleaning the device.
●Do not clean any interior parts yourself, leave this job to a service technician.
●Do not use any cleaning agents that contain abrasives or may corrode plastic.
●Ensure that no liquid will run into the system.
●Ensure that the ventilation areas of the device are free.
●The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.
Wipe the device casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out.
Transport
●Transport the device with care and only in its original packaging or another corresponding packaging to protect it from knocks and jolts.
●Never drop the device (danger of glass breakage).
Power cable
To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.
●The female/male receptacles of the cord set must meet
●The cable has to be
●For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.
●The cable set must be selected according to the rated current for your device.
CE marking
The shipped version of this device complies with the requirements of the EEC directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".
| 4 - English | |
Downloaded From |
| |