Fujitsu P50XHA58E, P42XHA58E Other Adjustments, Features setup screen has the following 4 options

OTHER ADJUSTMENTS

FEATURES setup screen has the following 4 options.

See Page E-20 for the basic procedures.

[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.

[On Screen Menu]: Can make a display setting such as OSD, Language. (See P. E-30.)

[Input Terminal]: Can make an input terminal setting such as Video Input. (See P. E-31.)

[Others]: Used to make Screen Orbiter and other settings. (See P. E-32–E-34.)

ADJUSTMENT

Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.

Select the item with CD, and then adjust with EF. Finally, press <to implement the adjustments.

Adjustment Item	Contents of Adjustments	Operation
Dot Clock	You may find the vertically-striped pattern in pictures,	Use EFto adjust to minimize vertically-
(mD-sub)	depending on the clock frequency of your PC’s processor.	striped pattern in pictures.
	If you experience blurring, you can obtain a clearer picture by
	adjusting the “Dot Clock”.
Clock Phase	Pictures and the outline of letters may blur or flicker as the	Use EFto adjust to minimize pictures blur.
(mD-sub)	clock phase of your PC may be different. In this case, adjust the
	clock phase manually. Normally, the automatic setting ensures
	the optimal value.
Clamp Position	Adjusts the extremely dark or bright pictures. Normally, the	Use EFto adjust pictures optimally.
(mD-sub, Comp.	automatic setting ensures the optimal value.
video)
Auto Calibration	Adjusts the dynamic range of images to the optimum.	Display the Auto Calibration screen and select
(mD-sub)	Performed while a white screen signal is received.	Execute, and then use CDto select the
		item.

E-29

Póññêèé Português Italiano Français Español Deutsch English

中文

日 本 語