Fujitsu P50XHA58E, P42XHA58E Cleaning and Maintenance, Before Obtaining Service, Problem Action

Page 39

CLEANING AND MAINTENANCE

Precautions

Be sure to remove the power plug from the receptacle before cleaning the display.

Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.

Cleaning the Screen

Clean the screen gently with a soft cloth.

The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.

Cleaning the Cabinet and Remote Control

Use a soft cloth for cleaning.

If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the stains. Use a soft, dry cloth for final cleaning.

Cleaning the ventilation grille

Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase the internal temperature of the main unit causing machine failure or fire hazard.

BEFORE OBTAINING SERVICE

In the event of problems with the display, check the following explanations before contacting your dealer for servicing.

Problem

Action

• Power does not turn ON.

• Check whether the power plug is securely inserted into the receptacle.

• No pictures are displayed.

• Check cables for disconnection.

 

• Check whether the power for all input equipment is ON.

 

• Check for connection to wrong terminals or for wrong input mode.

 

• Check whether the input mode display is colored pink. Special setup may have been

 

made. Return to original setup or initialize the User adjustment value.

• Remote control does not function prop-

• Check for incorrect battery orientation.

erly.

• Check for dead batteries.

 

• Check for distance from the display.

 

• Check whether you are pointing the remote control transmitter properly at the display’s

 

receiver.

 

• Check for any obstacle between the remote control and the display.

• The display makes a snapping sound.

• This sound is produced when the cabinet expands or contracts due to variations in temper-

 

ature. This sound does not indicate that the display has a problem.

• The display makes a buzzing sound.

• The display has fans to maintain the temperature of internal components at a constant

 

level. This sound is produced by the fan as it rotates. (Applies to models equipped with a

 

fan)

• There are spots on the screen.

• Check whether your AV equipment is affected by interference from automobiles, trains,

 

high-voltage transmission lines, neon signs or other potential sources of interference.

• Degraded colors/tints

• Check whether all picture adjustments have been properly made.

 

(See “Adjusting the Picture” on P. E-21–E-22.)

• Improper screen position/size

• Check whether screen position and size have been properly adjusted.

 

(See “Adjusting Screen Position and Size” on P. E-27.)

• No audio

• Check cables for disconnection.

 

• Check whether the proper audio input has been selected.

 

(See “Audio Input” on P. E-32.)

• If “Out of range” appears, the display is

• Signals that are not supported by this display have been input. Check which signals are

receiving a signal whose picture or signal

supported. (See “MAIN SUPPORTED SIGNALS” on P. E-37.)

cannot be reproduced by the display.

 

• The screen turns to black and white.

 

• If “Error message Condition 1” appears,

• Remove the power plug from the receptacle, and contact your dealer for repairs.

the fan is defective.

(Applies to models equipped with a fan)

• If “Error message Condition 2” appears,

• Remove the power plug from the receptacle. (You can turn the power back ON again

the display’s internal components are

when the components have cooled sufficiently.) If the message appears again when you

extremely hot.

turn the power back on, remove the power plug from the receptacle, and contact your

 

dealer for a repairs.

• If “Change refresh rate to 60Hz” appears.

• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4

 

(Hz). Change the setting of your PC, etc.

• If the power indicator lamp flashes red or

• Remove the power plug from the receptacle, and inform your dealer about how the lamp

green.

flashed.

 

The power indicator lamp flashes differently depending on the type of problem.

Note

• Functions may not be available with some models and some device options.

E-39

Póññêèé Português Italiano Français Español Deutsch English

中文

日 本 語

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Póññêèé Português Italiano Français Español Deutsch English Information Small ferrite cores Checking AccessoriesAttaching the Ferrite Cores Large ferrite coresInstallation Display Section Front SideReference Display Section Front Part Names and FunctionsDisplay Section Back and Bottom Part  / I power switch Video input terminal VIDEO1 Input # Power input terminal RS-232C terminal RS-232C  RGB1 input terminal RGB1 INPUT/mD-subTrademark Infomation Pin No Input signalPin No Signal Description of Input TerminalsRemote Control Using the Remote ControlDisplay front Display side Putting Batteries in the Remote ControlPrecautions Effective Range for the Remote ControlSee P. Î Example of Connection to External ComponentsDisplay bottom DVD RECORDER/PLAYER, Satellite TunerVCR Turning the Power on and STAND-BY Adjusting the VolumeBasic Operations Press -to select the input mode Selecting Input ModeVideo Input Mode RGB Input ModeOn-screen information Picture ModeOther Basic Operations Convenient FunctionsPress to select a desired Screen Size Switching Between Screen SizesWatching Pictures on the Wide Screen Press Aspect Ratio Screen SizeMenu Adjustment MenuBasic Procedures of Adjustment Menu Adjusting the Picture Setting Picture Mode Precision SettingSetting Picture Memory Setting 3D NR Precision SettingAdjusting the Black Level Setting Detail GradationSetting Image Enhance Adjusting the Color TempSetting User Color Temp Reddish color Setting the Color FocusAuto Off Making the Progressive Scan SettingsFrame Mode Motion SettingAdjusting Screen Position and Size Adjusting Screen Position PositionAdjusting Screen Size Size Adjusting Volume Balance Balance Adjusting AudioAdjusting Treble Treble Adjusting Bass BassAdjustment Item Contents of Adjustments Operation Other AdjustmentsAdjustment Features setup screen has the following 4 optionsSelection of indications Name Select Setting Display Information OSDOn Screen Menu Selecting Language LanguageRGB-PC Decoder Setting the Input TerminalsSelecting the settings of Video/S-video Input terminal Selecting the settings of D-SUB Input terminalOther Settings Auto Off-NO SIGSelecting input terminals Audio Input Displaying white over entire screen White Screen Setting RGB Input Signal Compulsorily Direct SettingSpecifying RGB Input Signal Code Setting Minimizing phosphor burn-in Screen OrbiterDisplaying System Status Information Setting Exhibition Mode Exhibition ModeInitialization of User Adjustment Value Press Eor Fto select FactoryPress Cor Dto select the Yes Options Frequency kHz Frequency Hz Main Supported SignalsSpecifications ModelRegulation Cleaning and Maintenance Before Obtaining ServiceProblem Action
Related manuals
Manual 32 pages 22.41 Kb Manual 32 pages 22.41 Kb

P42XHA58E, P50XHA58E specifications

Fujitsu, a leading name in the electronics industry, has long been synonymous with high-quality displays. Among their acclaimed offerings are the P50XHA58E and P42XHA58E plasma screens. These models stand out not only for their superior image quality but also for their cutting-edge technologies and user-centric designs.

The P50XHA58E is a 50-inch plasma display, while the P42XHA58E measures 42 inches. Both screens utilize Fujitsu's advanced plasma technology, which excels in color accuracy and contrast, delivering deep blacks and vivid colors. This is achieved through a high contrast ratio that enhances image clarity, making both models ideal for various environments, be it commercial or home use.

One of the standout features of these models is their extensive connectivity options. They come equipped with multiple HDMI and DVI inputs, allowing seamless integration with a variety of devices such as DVD players, gaming consoles, and PCs. This versatility ensures that users can easily switch between different sources without compromising on picture quality.

Additionally, both the P50XHA58E and P42XHA58E boast enhanced image processing capabilities. The advanced digital signal processing (DSP) enhances the quality of the source video, resulting in smooth motion and clear details. This is particularly beneficial for fast-paced content, such as sports or action movies, where motion blur can be a concern.

Fujitsu has also prioritized energy efficiency in these models. The displays feature energy-saving modes that help reduce power consumption without sacrificing performance. This is an important consideration for environmentally conscious consumers and businesses aiming to minimize operational costs.

Another characteristic that makes these plasma displays stand out is their thin design and lightweight build. This allows for easy wall mounting or placement in various settings without taking up excessive space. The sleek aesthetics complement modern interior designs, enhancing visual appeal in any space.

In terms of durability, both models are built to last, with robust panels that can withstand the rigors of extensive use, making them perfect for public installations. With high reliability, users can depend on the P50XHA58E and P42XHA58E for consistent performance.

In conclusion, the Fujitsu P50XHA58E and P42XHA58E are exceptional plasma displays that combine advanced technology, energy efficiency, and user-friendly features. They are perfect for anyone seeking high-quality visuals, whether for personal entertainment or commercial applications.
Top Page Image Contents