Homelogic Configuration Details

The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.

o	“<Select>”		Select the appropriate item from the list (or drop-down) in the Configurator.
o	“<User Defined>”, etc.		Type in the desired name for the item.

	Devices	Variable Name		Setting	Comments

Communication Devices		Name		<User Defined> (Default: Sony DVD)
		Type		Serial Port
		Communication Type		Standard Connection
		Location		<User Defined> (Not Required)
		COM Port		<Select>

	DVD Players	Name		<User Defined> (Default: Sony DVP-CX777ES)
		Device Type		Sony DVP-CX777ES
		Location		<User Defined> (Not Required)
		COM Device		<Select> (Default: Sony DVD)

Other Audio Devices/Interfaces		Name		<User Defined> (Default: New Interface)	See Note 1
		Template		DVD (Carrousel + Select)
		Default Device		Sony DVP-CX777ES

<Audio Zone Controllers>		Add an Audio Zone Controller: refer to the		Integration Note for your particular receiver or zone controller. (See Note 2)

Notes:

1.If the DVD player is going to be connected to an Escient DVDM-100 then refer to the integration note for the Escient.

2.You must add an Audio Zone Controller to get a tab in the Viewer interface.

For compatible receivers and zone controllers, refer to the Integration Note for the particular system.

For a single zone where the DVD player is connected to a basic amp, refer to the Single Zone Audio Integration Note.

3 of 4

HOMELOGIC CONFIGURATION DETAILS