N E W M O D E L I N F O R M A T I O N

2-channel Power Amplifier

POA-5200

THX Ultra Certified 2-channel Power Amplifier.

The POA-5200 dual monaural power amplifier provides superb stereo reproduction, and is an ideal choice for adding additional amplifier channels to a multi-channel system. For example, when combined with Denon’s AVR-4800 THX Surround EX A/V receiver, the POA-5200 can be used as the stereo front channels (left and right) amplifier, or the surround center back channels amplifier. The POA-5200 meets Lucasfilm’s stringent THX Ultra certification requirements, and provides 120 watts of power per channel, RMS into 8 ohms, and 200 watts of power per channel, RMS into 4 ohms.

THX Ultra Certified

Lucasfilm’s stringent THX Ultra certification for power amplifiers includes dozens of tests and specification requirements, all to ensure accurate reproduction of motion picture soundtracks and musical performances. All aspects of power amplifier performance are thoroughly verified, to ensure inaudible noise, wide dynamic range, extended frequency response with accurate spectral response, and the ability to drive any modern loud- speaker regardless of impedance or efficiency.

Dual Monaural Configuration

Unlike conventional stereo power amplifiers, which rely upon a shared power supply for both amp channels, the POA-5200 features Denon’s perfect Dual Monaural Configuration, with a separate high current power transformer and DC storage supply section for each amplifier channel. This provides the widest dynamic range, along with tremendous reserve capacity, compared to conventional stereo amplifiers.

Stabilized DC Characteristics

The use of a FET for difference input of one package type with superior direct current (DC) temperature characteristics and the ability to fine-adjust each channel individually have realized a high precision of 1 mV or less (standard value) in the output DC voltage of the POA-5200. This high- precision voltage is approximately one tenth that of conventional models and is the main reason these models are able to reproduce low-level signals with such exceptional fidelity.

A-B Speaker switching for each channel

One or two pairs of speakers can be connected to the POA-5200, and each pair can be activated or deactivated via front panel A-B speaker switching. Both pairs can be driven at once, if desired.

*Design and specifications are subject to change without notice. *THX is a registered trademark of Lucasfilm Ltd.

*“Dolby”, “Dolby Digital”, “Pro Logic”, and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation.

Strictly Selected Parts for High Sound Quality

A large number of high-performance parts, such as the electrolytic capacitor customized for high sound quality, OFC wiring material, film capacitor and resistors, have all been subject to stringent listening tests during their selection process to ensure unfettered, high-grade sound reproduction.

Remote Power ON/OFF

Rear panel mounted remote power on/off terminals are provided, for connection to Denon components such as the AVR-4800, for one-button power turn-on and turn-off convenience. This allows the power amplifier to be mounted in an out-of-the-way location, thereby saving valuable shelf space for more importantly accessible source components, for example.

Specifications

 

Rated output

120 W (8 ohms, 20 Hz - 20 kHz,THD 0.02 %)

 

200 W (4 ohms, 1 kHz, THD 0.5%)

Total harmonic distortion

0.008 % (-3 dB at rated output,

 

8 ohms, 20 Hz - 20 kHz)

Inter modulation distortion

0.002 % (60 Hz/7 kHz :

 

4/1 at rated output, 8 ohms)

Frequency response

1 Hz - 100 kHz +0, -3 dB (at 1 W)

Input sensitivity

1.1 V

Input impedance

47 kohms

Output impedance

0.1 ohms (1 kHz)

Signal-to-noise ratio

110 dB (IHF, A-weighting)

Speaker

A or B 4 ohms - 16 ohms

 

A + B 8 ohms - 16 ohms

Power supply

AC 120V, 60 Hz

Power consumption

4.7 A

Dimensions

434 (W) x 135 (H) x 353 (D) mm

 

17.1”(W) x 5.3”(H) x 13.9”(D)

Weight

12.3 kg, 27.1 lbs

DENON ELECTRONICS.

NIPPON COLUMBIA CO., LTD.

DIVISION OF DENON CORPORATION (USA)

14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN

222 NEW ROAD, PARSIPPANY, NEW JERSEY 07054, USA

http://www.denon.co.jp

TEL: 973-396-0810

http://www.del.denon.com

 

DENON CANADA INC.

 

 

17 DENISON STREET, MARKHAM ONTARIO, CANADA L3R 1B5

 

TEL: 905-475-4085

 

11961299 A Printed in Japan

 

 

 

Page 1
Image 1
Denon POA-5200 specifications THX Ultra Certified, Dual Monaural Configuration, Stabilized DC Characteristics

POA-5200 specifications

The Denon POA-5200 is a high-performance power amplifier that stands out in the realm of audio equipment, renowned for its exceptional sound quality and advanced engineering. This amplifier is part of Denon's legacy of precision and craftsmanship, making it a favorite among audiophiles and home theater enthusiasts alike.

One of the defining features of the POA-5200 is its robust power output. With a whopping 200 watts per channel into 8 ohms, and even greater power at 4 ohms, this amplifier is capable of driving demanding speaker configurations with ease. Its high current capability ensures that it can deliver dynamic sound reproduction across a wide range of audio frequencies, making it ideal for both music and movie soundtracks.

The Denon POA-5200 employs differential circuitry that minimizes distortion and maximizes clarity. This design feature enhances stereo imaging and provides a sense of depth that enriches the listening experience. Additionally, it incorporates a sophisticated power supply with a massive transformer that helps maintain stable performance, even during peak demand.

Another significant characteristic of the POA-5200 is its advanced protection circuitry. This reliable system safeguards the amplifier against overheating and short circuits, ensuring longevity and stability during prolonged use. Furthermore, the amplifier is equipped with a balanced XLR input, allowing for reduced noise and improved signal integrity when connected to high-end audio sources.

The amplifier's aesthetic design is also worth mentioning. It features a solid black chassis with a minimalist front panel that exudes elegance and sophistication. The easy-to-read volume knobs and indicator lights provide practical usability while maintaining a sleek profile.

In addition to its performance capabilities, the POA-5200 is designed with versatility in mind. Whether being used in a stereo setup or as part of a more complex home theater system, it offers seamless integration with other audio equipment. Its compatibility with various speaker types makes it an adaptable choice for many audio environments.

Overall, the Denon POA-5200 combines powerful amplification, advanced technology, and aesthetic appeal, making it an excellent choice for anyone seeking high-quality audio performance. Its careful engineering ensures that music and sound are reproduced faithfully, delivering an immersive listening experience that is hard to match. Whether enjoying classical symphonies or the latest blockbuster films, the Denon POA-5200 elevates audio playback to new heights.