Vidikron VL 52 Connecting External, Connect Positive, Speakers Optional, Amplifier

Installation

Connecting External	➤	Connect the	(positive) and	(negative) speaker wires to the rear-panel SPEAKER-R and
Speakers (Optional)		SPEAKER-L terminals; see Figure 3-7.Maintain the correct polarity. For more information,
		refer to the owner’s manual for your speakers.
			Twist exposed
			wire strands
			together.
			Push tab to the
			open position, and
			insert the wire.
			Then, close tab firmly to
			secure the wire in place.		Right Speaker	Left Speaker
		Figure 3-7. External Speaker Connection
Connecting to a Dolby Digital	➤	If your home theater has a Dolby Digital amplifier or receiver, connect the digital audio
Amplifier		output from the DView to the digital audio input of the amplifier/receiver as shown in Figure

3-8. The DView supports both coaxial (S/PDIF) and optical (TosLink) digital audio connections.

The audio output level is fixed. (The volume and mute controls affect only

Note the speaker and headphone outputs.)

Digital Audio Cable,

Optical

(Sold Separately)

- or -

Digital Audio Cable,

Coaxial

(Sold Separately)

Dolby Digital

Amplifier

Figure 3-8. Digital Audio Connection

20 Vidikron VL-52 and VL-57 Installation/Operation Manual