C New Password
4Display the “New Password” screen.
• Using [K/L], select “New Password”.
MPAA Rating
TV Rating
New Password
HDMI AUDIO
Set the method of sound input for HDMI jack.
| STILL |
- | 0 |
SETUP | SCREEN |
MODE | |
| ENTER |
BACK | INFO |
•Press [ENTER].
5Change the password.
•Use [the Number buttons] on the remote con- trol and enter the NEW
•Enter password again in “Confirm password” space.
V-Chipip
Enter password.
Confirm password.
PIN Code | BACK |
Back |
6To exit the setup, press [SETUP].
NOTES:
•Make sure to enter the exact same new password as the “Confirm password.”. If they are different, the space is cleared for reentering.
•Your password will be erased and return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the password, unplug the power cord for 10 seconds to restore the pass- word to 0000.
1Display the setup screen.
•Press [SETUP].
The following setup screen appears.
2Select “DETAIL” and press [ENTER] to confirm.
•Using [K/L], select “HDMI Audio” and press [ENTER] to confirm.
Detailil
Closed Caption
HDMI Audio |
| Auto |
3Switch the HDMI Audio.
•Using [K/L], select the desired HDMI Audio, then press [ENTER].
Detailil
|
| Closed Caption |
|
|
|
| |
|
|
| |
|
| HDMI Audio | Auto |
|
| ||
|
|
| Digital |
|
|
| Analog |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Select “Auto” if you connected to both digital device with HDMI jack and analog device for audio sources. Digital audio input signal has priority in this setting.
• Select “Digital” if you connected to digital device with HDMI jack for digital audio input signal.
• Select “Analog” if you connected to analog device with analog jacks for analog audio input signal.
4 To exit the setup, press [SETUP].
30
EN