![](/images/new-backgrounds/1230033/23003361x1.webp)
MISCELLANEOUS
ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to this TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
You need the following wall mount unit (commercially available) for this TV.
#CAUTION
•Any damage caused by incorrectly attempting to mount this TV is not covered under the terms of the manufacturers warranty.
•This LCD Color TV may be used only with
2
Rear of this TV
|
| 1 | 1 | |
* 1 | and 2 | indicate the | ||
|
position of the screw | Stand |
| |
holes on this TV. |
|
SETTINGS / MISCELLANEOUS
1Turn this TV over and place it
NOTES:
•Make sure to use a table which can support the weight of this TV and is larger than this TV.
•Make sure the table is in a stable location.
2Remove the stands from this TV.
Unscrew the M4 screws indicated by 1 and remove the stand.
Also, unscrew the M4 screws indicated by 2 .
Please be careful with the TV after you remove the stand.
NOTE:
•The M4 screws and stand you have removed are necessary for reattachment at a later date. Make sure to keep them in a safe place.
3Attach the left and right TV rails to this TV using the four Phillips screws M4 x 12mm bolt and four M4/M5 washers included with the wall mount kit. You don’t need to use the lock washers for mounting this TV.
NOTES:
•Only use the screw holes indicated by 2 for mounting this TV.
•For instructions on how to attach the TV rails, refer to the instruction manual included with the wall mount kit.
4Attach this TV to the wall.
NOTE:
•Refer to the instruction manual included with the wall mount when securing this TV to the wall.
*If you want to attach the stand of this TV again, insert the stand slowly as illustrated below and drive M4 screws in the 4 threaded holes ( 1 ).
1
OPTIONAL
31
EN