ViewSonic VS12472 warranty Network Control, Preparation, EN-25, Auto IP address setting Dhcp Yes

Network Control

This feature provides the ability to remotely control and manage the projector through the network.

Preparation:

1.Connect one end of the internet cable to the Network Control connector on the projector.

2.Connect the other end of the internet cable to an available RJ-45 connector on your computer.

3.Turn on your projector and computer.

There are two ways to connect to the network control:

A. Auto IP address setting (DHCP : Yes):

1.Enable DHCP from the projector OSD, under Network Config.

„When DHCP is enabled, IP Address, Subnet Mask and Gateway information will get from DHCP server automatically.

EN-25