ViewSonic N3250w manual It does not function in any other mode except in TV mode, How to do?

(It does not function in any other mode except in TV mode)

Source Input: TV

Page 1	PICTURE MENU		TV MENU
Page 2	INPUT SELECT	MTS	STEREO
Page 3	PIP/POP MENU	TV/CATV SELECT	CABLE
		AUTO SCAN
Page 4	SETUP MENU
		SET CHANNEL	00
Page 5	TV MENU
		CHANNEL	ADD
		LABEL
Page 6	SOUND MENU
		FINE TUNE	132
Page 7	PARENTAL CONTROL
		SLEEP	OFF

: SELECT : ADJUST

MENU : NEXT PAGE

	MTS: The function is to provide the multi-channel TV sound. The system with
E	MTS can receive Dual, Stereo, SAP(Secondary Audio Program), or Mono sound.
	Both Stereo and Mono sound receive from TV broadcasts in main sound.
N
	However, the SAP feature permits the TV station to broadcast other information,
G
	so that it can be audio in another language. With Dual sound, you can enjoy the
L
I	main sound (normal program soundtrack) and the second language at the same

Stime.

HTV/CATV SELECT: To select TV signal input from Cable or Air.

AUTO SCAN: To auto scan the TV channels (TV or CATV).

1.Function: To automatically preset the channels into TV. Kindly suggest you auto scan all the channels before watching your TV for the first time.

2.After auto scan all the channels, you need not to do it again when turning on

	your TV next time.
SET CHANNEL: To select your desired channels by .
CHANNEL: To add or delete the appointed TV channel.
How to do?
1.	Use the function “SET CHANNEL” to select the desired channel.
2. Move your cursor bar to CHENNEL by using .
3.	Press or one time to add or delete the appointed channel.
4.	Press ENTER to confirm the selection.

Ps. After input the instruction of Add/Del Channel, as running the channels by using with

your remote control, the channel you deleted will be passed over, and the channel you added will be shown up.

To restore the deleted channels, you may add the channels by Add function, or by Auto Scan to preset them.

LABEL: To set a name for the channel with 0~9 and A~Z.

ViewSonic N3250w 34