ViewSonic N3250w manual Basic Operation

Basic Operation

To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:

1.Insert the power plug.

2.Connect external equipment properly.

3.Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the LCD TV will not be used for a long period of time, please turn it off)

Power On/Off

To turn the LCD TV on/off :

Press the POWER button under the LCD TV or press the Power button on your remote control to turn on/off the TV. The power LED indicator lights up when the LCD TV is on.

Select input source

To select the required input sources. Use to move the cursor bar, and select by pressing Enter.

VOLUME Adjusting

Press or VOL-/+to adjust the volume.

To silence the volume, press MUTE.

If you want to restore volume, press MUTE again, or press directly.

VOLUME	20
Channel Select
Press number key, CH-/+key or	button to select your desired channel.

If your desired channel is below 100, directly press number key. If your desired channel is over 100, press 100 key first, and then press the other two number keys.

Ex: Your desired number is 8.

Press 0 press 8 or press 8 only.

Ex: Your desired number is 110.

Press 100 press 1 press 0.

Retnrn to last channel, press RECALL.

E N G L I S H

ViewSonic N3250w 27