Temporary or permanent temperature bypass
This operation allows you to temporarily modify the room temperature while you are in the Automatic mode. Simply press on 
or 
button to select the desired temperature, or the 
or 
button to select the Comfort or Econo settings you have programmed.This temperature will be maintained until the beginning of the next programmed schedule.
You can also switch to the Vacation setting for a prolonged absence by pressing
on 
and 
at the same time.The display will show 
icon. In that case, the derogation is permanent. To return to the normal operating mode, press on Mode button.
If you wish to immediately return to the programmed settings, press on Mode button twice.
CHARACTERISTICS
• Model: | ||
• Supply: | 120 VAC, 50/60 Hz | |
• Load: | 20 | A maximum (resistive only) |
• Power: | 2400 watts (NI) @ 120 VAC | |
• Approvals: | CSA / UL | |
• Display range: | 0 to 60 °C (32 to 140 °F) | |
• Setting range: | 5 to 30 °C (40 to 85 °F) | |
• Comfort default setting: | 20 | °C (68 °F) |
• Econo default setting: | 18 | °C (64 °F) |
• Vacation default setting: | 10 | °C (50 °F) |
• Storage: | ||
WARRANTY
AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY
This product is warranted against material defects and workmanship in normal use for a period of one year, from the date of the original purchase from authorized dealers. During this period, AUBE technologies inc. will repair or replace the product with a new or of equivalent quality at AUBE'S option, without charge, any product proven defective in normal use.
Warranty does not cover transportation costs. Nor does it cover a product subjected to misuse or accidental damage. This warranty does not cover the cost of installation, removal or reinstallation.
This limited warranty is in lieu of all other warranties, obligations or liabilities expressed or implied by the company. In no event shall AUBE technologies inc. be liable for consequential or incidental damages resulting from installation of this product. Some states or provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
The defective product and the original sale receipt must be returned to the original dealer or shipped
Aube technologies inc., 705 Montrichard, Iberville (Quebec), Canada, J2X 5K8
www.aubetech.com
service@aubetech.com
If you have any questions concerning the installation or programming of this product, please call our technical assistance at (450)
area or
PROBLEMS AND SOLUTIONS
PROBLEMS | CAUSES | SOLUTIONS |
|
|
|
No display | • Circuit breaker is open | • Check 120 VAC presence |
| • Power failure | at the thermostat |
| • The thermostat switch is | • Put the switch |
| in Stand by position | in On position |
|
|
|
The thermostat is loosing | • Power failure more than |
|
the time but not the programming | 2 hours |
|
|
|
|
Room temperature shown is wrong | • A draft is nearby the thermostat | • Eliminate the draft |
|
|
|
Heating system always on | • Bad installation | • Check installation |
|
|
|
The thermostat displays heating | • Bad installation | • Check installation |
but heating system is not turned on |
| • Check 120 VAC presence |
|
| at the heating system |
|
|
|
Programs do not change as you want | • Incorrect programming hours | • Check actual time |
| • Wrong programming mode selected | in AM & PM as well |
|
| as program times |
|
| (AM is not displayed) |
|
| • Make sure operating mode |
|
| is set to AUTO |
|
|
|
01/04/02
