![OPERATING MODES](/images/new-backgrounds/174479/1744793x1.webp)
OPERATING MODES
The
MANUAL ( )
This mode allows you to maintain a constant temperature in the room.
1- To activate this mode, press on Mode button to display the icon.
2- Set the desired temperature using the | buttons or select the | |||
, | or | settings. |
| |
(To select the | setting, press on | and | simultaneously.) |
AUTOMATIC (
)
This mode executes your own programming.
To activate this mode, press on Mode button to display the icon.
The or
icon indicates which temperature setting is used. Also, the icon of the program number will be shown.
Memory back-up
In the event of a power failure, an internal circuit will maintain the programming and the time. But only the time could have to be set if power failure is more than 2 hours.
Early Start function
The thermostat is providing a
PROGRAMMING
Programming the time and day
1- Set the time using the Hour and Min buttons. 2- Set the day using the Day button.
Programming the Comfort, Economy and Vacation settings
The Comfort , Economy
and Vacation
settings respectively represent the temperatures that you wish to have during the day
, at night or while you are away at work
, or while you are away for an extended period
.
To program your settings
a)To program the Comfort temperature, select the desired degree using the
buttons and press the
button until the
icon is displayed
(app. 3 seconds).
b)To program the Economy temperature, select the desired degree using the
buttons and press the
button until the
icon is displayed
(app. 3 seconds).
c)To program the Vacation temperature, select the desired degree using the
| buttons and press on the | and | buttons simultaneously |
until the | icon is displayed (app. 3 seconds). |
|
d)Press the Mode button to exit this function and return to the normal operating mode.
Schedule programming
The
Program | Mode | Time |
1 |
| |
2 |
| Departure time |
3 |
| Return time |
4 |
| Bed time |
For savings to be obtained, you must lower the temperature for a period of 2 to 3 times the delay required to bring the temperature back to your comfort level.
Example : If your system takes one hour to go from your saving temperature level to your comfort temperature Ievel, it is useless to lower the temperature for a period less than 2 to 3 hours.
a) To Program your Schedule
1- Press on PGM button to access the programming mode.
2- Press on Day button to select the day to be programmed. You can select all days of the week by pressing on Day button for 3 seconds.
3- Press on PGM button to select program 1, 2, 3 or 4.
4- Press on Hour and Min buttons to program the time.
5- When you have completed your programming, press on Mode button to exit this function.
b) To Erase a Program :
Select the program using PGM and Day buttons, and press on Clear button. The time field displays
c)Example 1 : Comfort period from 7:00 AM to 10:30 PM Economy period from 10:30 PM to 7:00 AM Identical schedule for all days of the week.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour button to enter 7:00 AM, Prog. 1 ( ).
4- Press on PGM button again to select Prog. 2 ( ), and press on Hour and Min buttons to enter 10:30 PM.
5- Press on Mode button to exit this function.
d)Example 2 : Comfort period: Monday to Friday from 6:15 AM to 8:15 AM and from 5:00 PM to 10:00 PM. Saturday & Sunday from 7:30 AM to 11:00 PM.
Schedule/Day | MON. | TUES. | WED. | THU. | FRI. | SAT. | SUN. |
PROG. 1 | 6:15 AM | 6:15 AM | 6:15 AM | 6:15 AM | 6:15 AM | 7:30 AM | 7:30 AM |
PROG. 2 | 8:15 AM | 8:15 AM | 8:15 AM | 8:15 AM | 8:15 AM | ||
PROG. 3 | 5 PM | 5 PM | 5 PM | 5 PM | 5 PM | ||
PROG. 4 | 10 PM | 10 PM | 10 PM | 10 PM | 10 PM | 11 PM | 11 PM |
|
|
|
|
|
|
|
|
NOTE : It is faster to program the same schedule for every day and then modify the exception days.
1- Press on PGM button to access the programming mode.
2- Press on Day button 3 seconds to select every day of the week.
3- Press on Hour and Min buttons to enter 6:15 AM, Prog. 1 ( ).
4- Press on PGM button to select Prog. 2 ( ) and Hour and Min buttons to enter 8:15 AM.
5- Repeat step 4 to enter Prog. 3 (5:00 PM) and Prog. 4 (10:00 PM).
NOTE : When making modifications, make sure you are in the right program.
To modify the Saturday and Sunday schedules:
6- Press on Day button until SA or SU is displayed.
7- Press on PGM button to select Prog. 1 ( ) and Hour and Min buttons to enter 7:30 AM.
8- Press on PGM button to select Prog. 2 ( ) and then Clear button to erase it.
9- Press on PGM button to select Prog. 3 ( | ) and then Clear button to |
erase it. |
|
10- Press on PGM button to select Prog. 4 ( ) and then Hour and Min buttons to enter 11:00 PM.
11- Press on Mode button to exit this function.