ViewSonic N4785P, N4285p warranty Rear and Side View of the Product

Getting Started

Rear and Side View of the Product

ENGLISH

Item	Description
1 Power (AC input)	Plug-in the supplied AC Power cord and connect to the AC
	input power source.

2Service (USB Terminal) This port is only for firmware upgrade.

3HDMI 1 Input Terminal Connect this port to the HDMI output of A/V device.

4HDMI 2 Input Terminal Connect this port to the HDMI output of A/V device.

5	RS232 signal input	This port is for the service technician’s use.
6	VGA signal input	Connect a 15-pin D-sub RGB cable to the RGB output of your
		computer and the other end to the RGB input on the rear of the
		LCD TV.
7	YPbPr 2 signal input	Connect this port to the YPbPr output of A/V device.
8	YPbPr 1 signal input	Connect this port to the YPbPr output of A/V device.

9Composite Video input Connect this jack to the composite video output connectors on your A/V equipment.

10	S-Video input	Connect the S-Video cable from the compatible device to this
		connector on the rear panel of the LCD TV.
11	Air/Cable input jack	Connect the coaxial (RF) connector from Antenna/ Cable/
		Digital cable.

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 15 N4285p/N4785p