Basic Operation
Power ON and OFF Modes
The main power of the LCD monitor can be turned on or off using the main power switch on the terminal panel. With the main power of the LCD monitor turned on, you can toggle between the on and standby modes using the following two options:
1. Pressing the Power button.
NOTE:
Before pressing the power button, be sure to connect the supplied power cord to the LCD monitor.
2. Using the remote control.
NOTE:
Before operating the remote control, be sure to connect the supplied power cord to the LCD monitor.
Power Indicator
Status | Color |
Power ON | Green |
Power OFF | Red |
Power Standby | Orange |
Failure detected | Flashing red |
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the monitor when the keyboard or the mouse has not been used for a fixed period. The power management feature on your new monitor has been set to the ”ON” mode. This allows your monitor to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the monitor.
ViewSonic CD4225 | 21 |