Appendix
Safety Guidelines
Warming: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120.
CAUTION: The
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below:
USA | UL | Switzerland | SEV |
Canada | CSA | Britain | BASE/BS |
Germany | VDE | Japan | Electric Appliance Control Act |
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet
Figure A1 | Figure A2 |
For the United States and Canada
In the United States and Canada the male plug is a
Cord Type | Size of Conductors in Cord | Maximum Current Rating of Unit |
|
|
|
SJT | 18 AWG | 10 Amps |
| 16 AWG | 12 Amps |
| 14 AWG | 12 Amps |
SVT | 18 AWG | 10 Amps |
| 17 AWG | 12 Amps |
|
|
|
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
WARMING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom
you have purchased the product.