Installation, Insert Remote Control Batteries

Installation

1. Insert Remote Control Batteries

1 Remove the battery cover by pulling then lifting the knob on the cover.

2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover.

CAUTION

Only use the specified AAA batteries.

Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

Insert batterise according to (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

Dispose of the battery in accordance with local laws and regulations. Keep the battery away from children and pets.

When the remote control will not to be used for an extended period, remove the batteries.

2. Connect audio and video cables to PC

Connect one or all of the following into the back of the

N1800TV.

Important: Make sure all devices are off before you begin.

PC RGB CONNECTION

Connect the supplied analog VGA cable from your

PC VGA OUT port to the N1800TV VGA IN port.

AUDIO CONNECTION

Connect the supplied stereo mini cable from the

PC’s AUDIO OUT port to the AUDIO IN port on the N1800TV.

ViewSonic N1800TV 9