Mounting ViewSonic LCD TV to the wall

Getting Started

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines:

zRead the Important Safety Instructions, at the start of this manual.

zDo not install in a moist or wet environment. This equipment is intended for indoor use.

zDo not install near heat source, or strong magnetic ﬁelds

zUse only ViewSonic approved wall-mounting brackets to support the LCD TV weight

zBefore attaching the wall mount plate to the back cover, ensure the product is working

zIf your LCD TV is already set up for free-standing operation, you need to ﬁrst remove the stand before mounting the device to the wall.

To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:

zDisconnect the power and any other cables that might hinder moving the LCD TV.

zSet the LCD TV on a table or work surface, placing the screen face down on a towel or woolen blanket to protect the screen surface from damage while installing plate.

zThrough the matching screw holes in the bracket, there are 4 or 6 screws mounted on the backside of the LCD TV. Loosen all screws, and keep for future use.

zInstall the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. N3290w, N4290p and N4790p wall-mount screw type is M6 x L10.

zMount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 6cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during operation.

zHang the LCD TV wall mount plate to the wall mount bracket, completing installation. Enjoy your ViewSonic LCD TV

Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818

ViewSonic

N3290w/N4290p/ N4790p