ViewSonic VS12282-1A, VS12280-1A, VS12281-1A manual Rear View of the Product

Getting Started

Rear View of the Product

Item		Description
1	Power (AC input)	Plug-in the supplied AC Power cord and connect to the
		AC input power source.
2	HDMI Input	Connect this port to the HDMI/HDMI-DVI jack of the
		compatible equipment.
	HDMI Audio (left/	Connect the DVI Audio Out on your device to the
	right)	HDMI Audio on the rear of the LCD TV display. This
		jack is used for DVI Audio.
3	Composite Video	Connect this jack to the composite video output
	input	connectors on your A/V equipment.
4	Composite/ Audio	Connect the Audio in cable for AV from this jack to the
	input (left/ right)	corresponding connectors on your A/V device.
5	YPbPr signal input	Connect this jack to the YPbPr output of A/V device.
6	YPbPr Audio input	Connect the Audio in cable for YPbPr from this jack to
	(left/ right)	the corresponding connectors on your A/V device.
7	Digital audio out	Connect to a Digital Audio device.
8	TV Input Jack	Connect this jack to your Cable or VHF/UHF antenna.
9	Composite Video	Connect this jack to the composite video input
	output	connectors on your A/V equipment.
10	Composite/ Audio	Connect the Audio out cable for AV from this jack to the
	output (left/ right)	corresponding connectors on your A/V device.
11	PC Audio input	Connect the RGB Audio Out on your computer to the
		RGB Audio on the rear of the LCD TV display. This
		jack is used for PC Audio.
12	VGA signal input	Connect a 15-pin D-sub RGB cable to the RGB output
		of your computer and the other end to the RGB input
		on the rear of the LCD TV display.

Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818

ViewSonic 12 N3290w/N4290p/ N4790p