ViewSonic VS12197-1G manual Antenna Installation Instructions, Cleaning the LCD TV

Page 5

ENGLISH

Antenna Installation Instructions

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2.Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off your LCD TV and wait for the weather to improve.

3.Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Antenna

Ground clamp

Electric service equipment Ground clamps

Antenna discharge unit

Grounding conductors

Power service grounding electrode system

Cleaning the LCD TV

Make sure the LCD TV is turned off.

Never spray or pour any liquid directly onto the screen or case.

To clean the screen:

1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2.If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1.Use a soft, dry cloth.

2.If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

ViewSonic

N1930w

Image 5
Contents Model No. VS12197-1G User GuideContents Important Safety Instructions Product Registration For Your Records Copyright InformationCleaning the LCD TV Antenna Installation InstructionsMounting ViewSonic LCD TV to the wall Package ContentsEnglish CH Up Front View of the ProductAV/S-Video/YPbPr Audio Input left/ right Rear View of the ProductRemote Control Enter Remote control button function as followConnecting RF antenna or Cable TV Wire InstallationInsert Remote Control Batteries Connecting to DVD / Set Top Box With HDMI-DVI cable Connecting to a computerConnecting with the power cord Basic Operation Using OSD Menu OSD Functions Sound Menu To adjust audio quality and status Channel Menu To setup for TV PC Menu To adjust for PC English Specifications Problem Possible Solution No power TroubleshootingUnit cannot be Declaration of RoHS Compliance Customer SupportViewsonic LCD TV Limited WarrantyViewSonic