GRAPHICS—Adjust the Graphics
BY OSD MENU
The graphics menu is only active in “RGB.” However, in “Component” mode, phase function will be available.
When in PIP/PBP/Multi Window screen, graphics menu only works on main screen. In sub screen, it is unable.
Press MENU.
Press | to select Graphics. |
Press ENTER. | |
Press | to select the desired |
item you want to adjust. | |
Use | to adjust it. |
Press EXIT to close the recent page.
Press MENU again to leave OSD Menu.
Auto Adjust: Auto adjust picture’s horizontal position, vertical position, fine tune and
H. Position: To adjust the horizontal position of the graphic.
V. Position: To adjust the vertical position of the graphic.
Phase: To remove any horizontal distortion and clear or sharpen the display characters.
E N G L I S H
ViewSonic N2750w 21
Downloaded From