ViewSonic NB2750w Cleaning the LCD Display, To clean the screen, To clean the case, Disclaimer

Page 5

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury; turn off you LCD and wait for the wether to improve.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

E

N

G

L

I

S

HCleaning the LCD Display

Make sure the LCD Display is turned off.

Never spray or pour any liquid directly onto the screen or case.

To clean the screen:

1Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1Use a soft, dry cloth.

2If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

ViewSonic N2750w 4

Downloaded From TV-Manual.com Manuals

Image 5
Contents N2750w Lcdtv Display Contents Product disposal at end of product life Product RegistrationFor Your Records Important Product Safety Instructions To clean the screen Cleaning the LCD DisplayTo clean the case DisclaimerGetting Started Enter Front View of the ProductMenu Rear View of the Product Remote Control Remote control button function as follow Index button TEXT/ MIX/ Picture buttonList button Size buttonSubcode button Hold buttonStore button Connecting with the antenna InstallationInsert Remote Control Batteries Connect AV, S-Video, YPbPr to Video Devices Connect Audio CableAV model OptionalYPbPr model Video modelVGA 15pin D-Sub Connect to the PCPC Audio VGA 15 Pin Cable Cable not suppliedEarphone Connect power cableAC Switch Turn Power on Volume Adjust Powering the LCD TVBasic operation Channel SelectInfo Using the OSD FunctionFreeze Input Source SelectBy OSD Menu VIDEO-Adjust the VideoGRAPHICS-Adjust the Graphics By Remote Control AUDIO-Adjust the AudioDisplay DISPLAY-Adjust the DisplaySETTING-To setup the Setting Program Name DefinitionFavorite PIP-Adjust the PIP Adjust Zoom Multi-Window Zoom AdjustAdjust PAN PIP PBPOPTION-Adjust the Option LCD SpecificationsTroubleshooting = FAX Customer SupportViewsonic LCD Display Limited WarrantyCE Conformity for Europe Safety Guidelines