Basic Operation
To operate your LCD TV, you may use the TV remote control or buttons located at top of the LCD TV to select input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1.Connect external equipment properly.
2.Insert the power plug.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button at the bottom of the LCD TV or press POWER button on your remote control to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Note: when there is no signal in the PC mode, the power LED indicator lights amber after a few seconds’ idleness.
Select input source
Press the INPUT button on the remote control ,then press ▼ or ▲ to select the re- quired input source between PC, HDMI,TV,AV,
Volume Adjusting
Press VOL +/- to adjust volume. To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.
Channel Select
Press number keys, CH▲▼ buttons to select the desired channels. Ex: the desired channel is 8, press 8 only.
Ex: the desired channel is 80, Press 8, then press 0. Return to previous channel, press RETURN key.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automati- cally shut off the LCD TV after a preset period of time passed.
There are several times for choice
INFO
To display the current information of the LCD TV, press INFO, and the current state will be displayed on the screen.
Switch Sound Mode
Repeatedly press MPX button on remote control to Switch the sound mode in NICAM-
Stereo or
ENGLISH
ViewSonic | 14 | NX2232w |