| Troubleshooting |
|
|
Problem | Possible Solution |
|
|
|
|
|
|
No power | • Make sure the power cord is properly connected to the LCD TV AC |
|
|
| power socket. |
|
|
| • Make sure the AC power cord is properly connected to the wall outlet. |
|
|
| • Make sure the DC power button is ON (Blue LED). |
|
|
| • Plug another electrical device (like a radio) to the power outlet to |
|
|
| verify that the outlet is supplying the proper voltage. |
|
|
|
|
|
|
No picture | • The TV station may be experiencing problems. Try another channel. |
|
|
| • The Cable TV signal may be scrambled or encoded. Please contact |
|
|
| your local cable operator. |
|
|
| • Make sure that connection to other components are correct referring |
|
|
| to the user guide. |
|
|
| • Make sure that setup has been done correctly after connections. |
|
|
| • Make sure the correct input is selected and the input signal is |
|
|
| compatible. |
|
|
|
|
|
|
Strange color, | • Ensure that the video cable is securely connected. |
|
|
| |||
light color, or color | • The picture may appear dim in a brightly lit room. |
| ENGLISH |
misalignment | • Adjust brightness, contrast, saturation (color), and tint referring to the |
| |
|
| ||
| user guide. |
|
|
| • Check the input signal setting. |
|
|
|
|
|
|
No sound | • Check your audio connections are properly connected referring to the |
|
|
| |||
| user guide. |
|
|
| • The MUTE button may have been pressed, try pressing this button |
|
|
| again. |
|
|
| • Check your audio settings, your TV audio may be set to minimum. |
|
|
| • Press the Volume + (Up) button on the remote control. |
|
|
|
|
|
|
Remote control | • Make sure the directions of batteries are inserted correctly referring to |
|
|
unit does not | the user guide. |
|
|
operate | • Batteries could be weak or dead. Replace by new batteries. |
|
|
| • Is a fluorescent light illuminated near the remote control sensor? |
|
|
| • The path of the remote control beam may be blocked. Make sure the |
|
|
| path is clear and that the remote control is aimed at the remote control |
|
|
| sensor on the TV. |
|
|
| • Press the POWER button on the remote control to see if you can turn |
|
|
| on the TV. |
|
|
| • Press MENU button on the remote control to see if there is a MENU |
|
|
| shown on the screen. |
|
|
| • Press only one button at a time and it is the correct one for the |
|
|
| operation you want to perform. |
|
|
|
|
|
|
ViewSonic | 22 | NX2232w |