TV OPERATION
•SELECTING RECEIVING MODE
Press TV/AV button (31) to select among TVch/AV1/AV2.
•PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL
In TV mode, press MENU button (23) to enter the main menu. And the menu includes three
-In PICTURE MENU, use CHANNEL SELECT + button (28) or CHANNEL SELECT
– button (29) to select picture mode upward or downward as follows:
BRIGHT 
CONTRAST 
COLOR 
SHARP 
TINT
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the selected item. Note: In PAL SYSTEM, there is no “TINT” item.
-In TUNER MENU, use CHANNEL SELECT + button (28) or CHANNEL SELECT
– button (29) to select picture mode upward or downward as follows:
POS 
SKIP 
BAND 
FINE 
AFT 
SEARCH 
ASM 
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the selected item.
-In SYSTEM MENU, use CHANNEL SELECT + button (28) or CHANNEL SELECT
– button (29) to select picture mode upward or downward as follows:
COLOR 
SOUND 
LANG. 
B/B 
CORING 
HALFTONE 
Then use CONTROL + button (24) or CONTROL – button (25) to adjust the selected item.
In AV mode, press MENU button (23), the screen will display PICTURE MENU and SYSTEM MENU but not TUNER MENU. And in SYSTEM MENU, there is no “SOUND” item. The setting method is the same with that in TV mode.
Note: In the menus (except TUNER MENU), if you don’t operate over 6 seconds, the screen display will disappear.
•SELECTING CHANNEL
Press CHANNEL SELECT + button (28) or CHANNEL SELECT – button (29) to choose channel upward or downward.
•PROGRAM SCANNING
Press SCAN button (26), “SCAN OFF” will display on the lower left corner of the screen. Press it again, the screen will display “SCAN ON”, then it begins to scan 1.5 seconds of each channel in sequence. When it completes, the screen will display “SCAN OFF”.
13