REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented indicated.
3.Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal reciver).
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
To prevent damage to the unit, be sure to follow the connection diagram (page 9).
Loading a DVD/VCD/CD Disc
1.Turn the ignition on the the accessory position.
2.Press the POWER button (1).
3.Press the OPEN button (2), the front panel will fold down slowly.
4.Insert the disc with printed side facing up.
5.The player starts playback automatically.
2 | 1 | 4 | 3 |
Ejecting a Disc
•Press the OPEN button (2).
•Let the panel fully fold down, then press 
(8) to eject.
•Remove the disc and close back the front panel.
5 8 6 7
(1)Power Button
(2)Open Button
(3)Remote Sensor
(4)VFD Display
(5)Disc Slot
(6)Flash LED
(7)Reset Button
(8)Eject Button
11