Part 1b-Concrete Wall Mounting
Level wall plate and use it as a template to mark holes. Drill 3/8”(10mm) dia. holes 2”(50mm) deep. Insert anchors(K) into holes and secure wall plate with long bolts(J) and washers(L). Tighten screws firmly. Do not overtighten.
2” (50mm) |
Φ3/8”(10mm) |
Concrete Wall
K | Bubble level |
| |
| J |
L |
|
Part 2a-Attaching Brackets To Screen With Flat Back
Center brackets vertically on back of screen. Select the small(A or B),medium (C or D) or large(E) screws. Attach brackets to screen using four selected screws and four square washers(I) at the top and bottomof each bracket. Tighten screws firmly. Do not overtighten.
Square washer(I)
Large hole for
M8 screws
Medium hole for
M5 and M6 screws
Small hole for
M4 screws
I
|
|
| ||
|
|
|