XM Operation

OPERATION

RADIO OPERATION SWITCHING TO RADIO MODE Press MOD on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency.

SELECTING THE FREQUENCY BAND During radio mode, shortly press BND/MEN button on the front panel or BAND (MENU) button on the remote control to select the desired band. The reception band will change in the following order:

FM1 FM2 FM3 AM1 AM2

SELECTING STATION

During radio mode, shortly press

CH/TUN/TRK button on the front panel or button on remote control to increase frequency by one step of channel spacing, and shortly press CH/TUN/TRK on the front panel or button on remote control to decrease frequency by one step of channel spacing. Hold

CH/TUN/TRK / buttons on the front panel longer or press / buttons on the remote control for fast tuning. The frequency is updated correspondingly on display.

LOCAL/DISTANT

Press ST/XM-MODbutton on the front panal or remote control for several seconds to select between local and distant stations.

Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.

AUTOMATIC MEMORY STORING & PROGRAM SCANNING

-Automatic memory storing

Press and hold AMS button on the front panel or on the remote control for several seconds, the radio searches from the FM1 the initial frequency and checks the signal strength until one cycle search is finished. And then 6

strongest stations are stored into the corresponding preset number button.

-Program scanning

Press AMS button shortly to scan preset station.

STATION STORING

Press any one of the preset buttons (1 to

6)on the front panel to select a station, which had been stored in the memory. Press this button for several seconds, current station is stored into the number button.

MONO/STEREO

Press ST/XM-MODbutton on the front panal or remote control shortly to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.

SCAN

Press ENT/MUT button on the front panel shortly to set the function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds.

SWITCHING TO XM MODE

Shortly press MOD button to select XM mode.

SELECTING USER-PRESET CHANNEL In XM mode, the XM user-preset channel group (3 channels) is toggled cyclically through the group by quickly pressing the BND/MEN button.

The channel will change in the following order:

XM1 XM2 XM3

SELECTING CHANNEL UP/DOWN

Press the CH/TUN/TRK button or

CH/TUN/TRK button to select the channel up or down.

SEARCHING SCHANNEL

When the AMS button is shortly pressed, the unit searches for each user preset channel from XM1, XM2 to XM3. When an available channel is detected, the