Esoteric UX-1 owner manual DVI-D video output terminal, D1/D2 video output terminals component

Page 11

<Adjust the video aspect ratio to match that of the television (see page 38) .

<If the component video terminals or the D1/D2 terminal are used to connect the unit to a television with progressive- scan capabilities, the output can be set to match this (see page 39).

<This unit adopts analog copy protection features. If the unit is connected to a TV through a VCR (video cassette recorder), the resulting playback may be affected. Connect the unit directly to the television.

<In all cases, use the highest quality cables for the best possible picture.

ADVI-D video output terminal

Use a commercially available DVI-D output cable to connect the unit to a DVI/HDCP compatible television or monitor.

DVI output formats

480p (NTSC) or 576p (PAL), 720p, 1080i

<The television connected in this way must be DVI/HDCP compatible. Use with incompatible televisions may sometimes result in the playback picture not being visible.

<See page 26 for further details on DVI output formats.

<Make sure that you read and understand the documentation provided with the DVI component, as well as this unit’s documentation.

BD1/D2 video output terminals (component)

By using a commercially available D terminal cable to connect the unit to a “D compatible” (D1, D2, D3 or D4) television or monitor, high-quality images, equivalent to those achieved using component video, will be displayed.

D terminal and signal format (NTSC/PAL)

480i/576i480p/576p

(525i/625i) (525p/625p)

D1 terminal

X

D2 terminal

D3 terminal

D4 terminal

Numbers in parentheses show the number of scan lines i = interlace (flyback)

p = progressive scan

CComponent video output terminals

Use commercially available BNC coaxial cables to connect the unit to the component video inputs of a suitably- equipped television or monitor to enjoy a high-quality picture. Use these terminals in preference to S-Video or composite video connections.

<Note that these terminals cannot be connected to high- definition component (Y/PB/PR) terminals.

<If the television or monitor is equipped only with RCA (pin) jacks for component video, a suitable adaptor cable or adaptors should be used.

 

 

 

D

S-Video output terminal

ENGLISH

 

unit to the S-Video input of a suitably-equipped television or

 

Use a commercially available S-Video cable to connect the

 

 

monitor. Use this connection in preference to a composite

 

 

video connection.

 

 

EComposite video output terminal

Use a commercially available RCA (pin) video cable to connect the unit to the composite video connector of a television or monitor. Use this connection only if no other video connection method is available.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DVD/DVD-A/SACD/CD Player For U.S.A Important Safety Instructions① For U.S.A Important for U.K.CustomersContents Features Conventions about This Manual Placement of the unitBefore Use What’s in the boxAbout MOD.Modulation PAL Restoring factory settingsChanging the Color System NTSC/PAL Sacd DiscsType of Discs That Can be Played on This System Example of Icons used on DVD discs Following discs cannot be played with this unitTV Monitor Connection to a TVVideo output terminal DVI-D video output terminalD1/D2 video output terminals component Component video output terminalsDecoder-equipped amplifier Connections to an amplifier, etcStereo amplifier Surround amplifierAnalog audio output terminals Word sync connectorSignal GND connection Power cord receptacleFront panel features Front panel display Understanding the remote control unit How to insert the batteries On-screen menu PlaybackOpening and closing the tray Pausing playback freezing the pictureResume mode Stopping playbackSelecting the playback area Selecting groups and titlesSkipping playback Selecting a chapter or trackTitle, group, disc repeat Repeat modeFast scanning Chapter and track repeatFinish the programming by pressing Play When selecting tracks from a DVD audio discProgrammed playback Clearing the whole program Changing camera angleClearing the last track from the list Adding tracks to the listFrame advance Slow motion/frame advanceSelecting audio Slow motionDisplay dimming Use the FL Dimmer button to cycle between these settingsSelecting subtitles Lip syncDVI output aspect ratio DVI outputDVI output format DVI levelAnalog sound output Clock ModeDown mode Turning video on and offDVD video stopped, on-screen display Changing the display modeDVD video playback main unit display DVD video playback on-screen displaySACD/CD/video CD stopped, main unit display DVD audio playback on-screen displayDVD audio stopped, on-screen display SACD/CD/video CD playback main unit displayEnter the menu item with the right cursor button Settings introductionExit the setup mode by pressing Setup once more Use the cursor buttons to navigate the menusCD Digital Direct Settings AudioAnalog output settings Digital output settingsDownmix Group playback mode DVD audioAudio DRC Dynamic Range Controlling Enter Settings VideoVideo adjustment Progressive scan settingDisplaying subtitles Settings LanguageAudio language selection Subtitle language selectionLanguage Code List Speaker distance Settings General/Speaker setupSpeaker Size Digital output formats Settings GeneralSpeaker levels Test tone lengthVideo output Settings General/Video OutTV screen Closed captioning Still modeComponent video output PAL-NTSC conversionParental Control Settings General/DisplayPlaying a controlled disc Setting the level of controlResetting the password Country CodeTroubleshooting WRD Unlck MaintenanceBeware of condensation Specifications English Block DiagramTeac Corporation
Top Page Image Contents