Daewoo SD-8500P, SD-8800P Connections and Copying, Hi-Fi system, What you can listen to

More Functions

■The player records the complete sound signal transmitted by the TV station.

■On the mono VCR, you will hear the normal mono sound.

The Hi-Fi system

In addition to the normal mono sound track of VHS video recorders, your player is equipped with a high- quality Hi-Fi sound system.

This means you can enjoy

•films with excellent stereo sound

•films of full-length concerts in high quality stereo

•films with impressive Surround Sound using additional Surround equipment

•films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track

•VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound

Connections and Copying

■If you are using a SCART cable, select the AV input on the TV to see the picture from the player.

■If you are not using a SCART cable, select the programme number on the TV reserved for video input to see the picture from the player.

To the TV via antenna cable (if you are not using a SCART cable)

If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH 52). Tune the TV carefully to ensure the best pictures and sound.

1	Once you have carried out the steps in "Connecting up the player" , switch
	on your TV.
	Press the [OK] button of the player’s remote control longer than 5 seconds
	to call the player´s test picture.
	Tune the TV to the test picture using the channel pre-set functions of your

What you can listen to

During Stop, the player displays what the current station is broadcasting. When you switch to another station or the current station changes the sound mode, your player displays the programme and sound mode on screen (if not, press AUDIO).

•“STEREO” = stereo

“BIL I / BIL II ”=bilingual nothing= monaural sound

STOP SP	PR10 EURO
	STEREO ON

	TV as described in its manual.
	When you have found the test picture, store it under the button number on
	your TV for player input.
	Press the [OK] button of the player’s remote control again longer than 5
	seconds to release the test picture.
2	• If the quality of the test picture transmitted to the TV is poor due to
	interference caused by a station transmitting on channel 52, you can tune
	the player to a different transmitting channel. Find a free channel

between 21 and 69 on your TV.

RF OUTPUT SET

CH52

VCR Operation

During Playback, the player displays what is recorded on	PLAY	SP	Hi-Fi
the cassette (if not, press AUDIO).			L+R
• “Hi-Fi” = stereo/bilingual
nothing = monaural sound

Call the player’s "SETUP" choose "VCR SETUP" then "RF

OUTPUT SET".

Type in the free channel.

Store and exit.

0-9:SELECT (21-69)

OK:CONFIRM SETUP:END

Choice of sound output

During a stereo performance (playback-”Hi-Fi”/ broadcast - “STEREO”):

Hi-Fi stereo left audio channel only right channel only the normal mono sound track of a Hi-Fi cassette

•During broadcasting a bilingual performance : Main language (original sound track) sub-language (dubbed) both main language and sub-language OFF.

•For mono performances , there is no choice available.

PLAY	SP	Hi-Fi
	HI-Fi	L+R
	LEFT

Hi-Fi

RIGHT

Hi-Fi

OFF

STOP SP	PR10	EURO
	BIL	BIL
		I
BIL	II
I+II
BIL
OFF

•If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the TV manual).

•Without a scart cable, you will not get stereo sound from a TV capable of stereo sound.

32 33