Daewoo SD-3500P, SD-9500P, SD-9800P Setting time and date / Auto clock, Setting Auto clock

Setting time and date / Auto clock

Setting time and date

■Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

below.

1	Call the player’s "SETUP",
	choose "VCR SETUP", then "CLOCK SET".

2	Move to the position you want to change and type in the
	new values.
	Wait a few seconds after typing a one-digit number.

Store with [OK] button and exit with [SETUP] button.

CLOCK SET

TIME - - : - -

DATE - - / - - /- - - -

0-9:SETUP (HOUR)

</>:CORRECT SETUP:END

CLOCK SET

TIME 06:05

DATE 08/06/2003(SUN)

0-9:SETUP (HOUR) </>:CORRECT

OK:CONFIRM SETUP:END

Basic Operation

Setting Auto clock

■Auto Clock is only available for models with the VPS/PDC function (see page 27).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will automatically use this time and date during the initial setting up procedure during normal use, and every time you switch the video off at the mains. If you find that this time and date is incorrect you can remove this feature by following the steps below changing it to the OFF mode, you will then have to manually set the time and date, see above.

VCR SETUP

CLOCK SET

RF OUTPUT SET 16:9 SET

OSD ON/OFF AUTO CLOCK

PR+/-:SELECT

OK:CONFIRM SETUP:END

AUTO CLOCK

ON

OFF

PR+/-:SELECT

OK:CONFIRM SETUP:END

19